One shoulder top… times two…

What do you do if you can’t decide if your top should have a sleeve or not? You make both versions of course!

download

I originally only had the sleeved version of this little one-shoulder top in mind, but that changed mid-construction. I left the sleeve off the first version, but since I’d already cut the sleeve, I decided to follow through with the sleeved version too.

The fabric is a vintage score from an estate sale. It’s some type of seersucker, but most likely a poly version, which means I’d already delegated it to the “wearable muslin/kid” section of my stash. I love having a few good lengths of stress-free fabrics like this in my stash. It takes the fear out of experimenting with new designs and styles, but still makes a fun, wearable item if I do end up liking it.

back4

Now, let me talk about the design a little, because it is something you can easily replicate yourself. I used my Branson Top pattern as a base because I love the more fitted back and slightly dropped shoulders of that design. You could use any TNT top version that you already have on hand.

Here are the steps I took in making the modifications:

  1. Removed the CF seam and traced the front and back pieces in full. You won’t be able to cut any pieces on the fold because the pieces are all asymmetrical.
  2. I raised the front hemline to match the back (the front hem dips lower in the Branson top).
  3. I brought the neckline of one shoulder seam in towards the neck by 1.5 inches.
  4. Sliced diagonally across the pattern pieces to create the one-shoulder shape. I shaped this line with a very slight curve in my version but you could keep the line straight. The diagram below shows the back pattern pieces, but I kept the line the same for the front.

oneshoulder

In the sleeveless version, I simply added some elastic in a strip of casing at waist level in the front of the top only (the waist is marked by the back seam above the peplum in the Branson top). The back of my top is fitted so it doesn’t need any elastic. I used pre-made bias tape for the casing.

back1

I bound the neckline with pre-made bias binding, turned to the inside to function as elastic casing for thin elastic. The neckline only needs a lightweight/thin elastic to pull it in against the body, rather than hold it up.

For my sleeved version, I just shortened the sleeve and added elastic casing.

back8

These tops were both super easy to make and will be a fun addition to my wardrobe for the last half of Summer.

back5

 

 

6 thoughts on “One shoulder top… times two…

  1. Cute ! I love how easy it is to hack a pattern into something like this. It looks great and casual in seersucker, but I bet you could go really glam with something sparkly !

Comments are closed.