Grainline Archer refashioned

Unless my memory fails me, this was the second Grainline Archer I ever made. I think I ended up getting the fit right on my third try. I still wore the original version of this shirt, but it’s become way too tight across my shoulders since my return to the pool.

It was time to put this shirt to better use. I was lucky enough to have a decent sized remnant of the original fabric in my stash which meant I could go to town with my flounces. As beautiful as they are, flounces are very big fabric hogs!

I wish I took photos of my refashion during the process. I didn’t. However, I’ve drawn a few diagrams to help. It wasn’t a complicated refashion. I started by cutting off the sleeves of the shirt. Then I pencilled my intended seam on the remainder of the shirt. The diagram below shows the new seam I created. The front seam is red (on the front shirt pieces) and the back seam is green (imagine it on the back shirt pieces). Both are connected at the shoulder seam. I wanted the diagonal seam to be wider at the shoulder yoke seams and more medially placed towards the shirt hem. I brought the seam closest to the CF in the front of the shirt. The scariest bit was cutting along this seam and keeping both sides exactly even! After cutting, I then had three shirt pieces that I needed to stitch back together, taking into account the new seam allowances that would be eating into my shirt size!

For the flounce, I simply measured the entire length of the new seam and used that as a reference for the curved edge of a flounce. A flounce pattern piece is basically a big circle. I made mine a bit wider at the centre point (the area covering the shoulders). I also added an extra four inches (approx.) to the length of my flounce as I knew I wanted to add a couple of pleats over the shoulder region. The diagram below is an approximate representation of my flounce piece. Imagine it trued and smooth in real life!

I faced the flounce with self-bias-binding before I sandwiched it between the pieces of shirt. And once the flounce was attached and the shirt was in one piece again, I tried it on. I used 1cm seam allowances with my new seam so I knew that I lost exactly 8cm in shirt girth by inserting the flounce (2cm on each front and back seam). To compensate this, I decided to add contrast white panels down the sides of the shirt. This alteration in turn, would eat up another 2cm on each side of the shirt. So, I measured 8cm wide panel pieces to attach to the sides. The panel width is 6cm (incl. 2cm of seam allowances). These side panels returned the shirt to the same shirt-fit as before. I then bound the armscye and hemmed the bottom a little straighter and shorter than before.

I’m not joking when I say that this is my new favourite skirt. I’ve already worn it a lot. It pairs beautifully with skirts for an elegant evening look. But I also love it with jeans when I’m aiming for polished casual.

Black trimmed lace dress

I made this dress some time ago and entered it into the Tessuti cut out lace competition. However, I always had bigger plans for it. Here are some updated photos.

blace2

blace9

Pretty much all the details are the same as before. I simply unpicked all the extra overlay that I’d handstitched in place over the shoulder straps, and turned the black trim back to the outside. There was a little seam-ripping and re-sewing involved but it was worth it (and easier because I’d made allowances for the changes to begin with).

blace10

Now it’s just a shame that Summer is edging away from us. I’ve probably only got a few weeks of lace left but I will enjoy it while I can.

blace12

blace7

blace4

blace12

blace6

Oliver + S // Pinwheel slip dress in silk

I have quite a mammoth sewing to-do list in the lead up to Christmas. I didn’t plan it that way. In fact, I didn’t plan to do much Christmas sewing at all this year. My only goal was to sew that velvet dress, and of course, the Winter coat (that is slowly coming along).

The Winter coat now has buttonholes and a collar, but the rest of it has been put on hold while I catch up on the selfless sewing that I was trying to avoid. However, I think the Christmas bug has just caught me a little later this year, because I’m looking forward to the quick and fun sewing that is now on my horizon.

It all started with Miss Seven. It’s an annual tradition at her elementary school for all the 2nd grade students to dress up and attend the Nutcracker, by the Kansas City Ballet. It’s quite a special occasion for the little kids each year and even more special because her best friend is a part of the cast (although not performing on that day). The kids look forward to this event for literally a whole year, but I didn’t consider the ‘dress-up’ component until about a week ago when Miss Seven started muttering about the ‘fancy dresses’ the other girls were wearing, and then the email came home from the teacher requesting that the boys wear ‘nice’ jeans or pants.

Miss Seven already had the perfect dressy coat for the occasion. But I decided to sew her a special dress to wear with it. The fabric came from my stash. It is a vibrant Ralph Lauren silk CDC that I previously used to line this coat of mine. I had the perfect amount for the Oliver + S Pinwheel slip and tunic dress pattern.

3

4

I modified the pattern slightly to sew the tunic and slip as one, instead of making separate dresses to layer as the pattern suggests. I also changed added a keyhole to the back as the method of fastening. To do this, I copied the neckline and armscye of the tunic over the slip pattern and then sewed them together at the neckline. This eliminated the need for neck binding or facing. The slip portion also became the lining. In addition, I lengthened the arms.

5

I’m pretty chuffed with how this dress turned out. I made it up in a size 8 but was a little worried it would be too big. Miss Seven is taller than average and quite slim through the body and hips (her hips and waist are a size 5), but she seems to have a nice width to her shoulders which probably accounts for how the dress fits. The shoulder fit is great but the dress volumes out beneath that (which is nature of a the dress design anyway). The length is short but acceptable (I normally lengthen patterns for her).

Miss Seven is delighted with her early Christmas present and that makes me happy too. I consulted with her all the way in the making of it, because I feel like she’s old enough now to start developing a more informed opinion on clothes and styles (rather than just a need for all things swishy, ruffled, and pink). Of course, I had to pull the reigns in with regards to her initial selection of suitable fabrics and design (ie not floor length velvet like Mummy), but we talked over the options and she came up with some of her own ideas. In the cool weather, she’ll be wearing this dress with white, fleece lined tights which will look super cute too.

2

Oliver + S Apple Picking Dress in bird fabric

When I went fabric shopping for my bias dress muslin, I may have purchased a little too much of this particular bird fabric. It has a lovely, light-weight feel and drape, but it is still 100% polyester. I find it easier to overlook the poly-factor when filling my childrens’ wardrobes.

1

10

2

Miss Seven was the recipient of this Apple Picking Dress by Oliver + S. There are quite a few details in this pattern that require a little extra care, but nothing is particularly complicated. In fact, the only thing that made this dress difficult was my choice of slippery, press-resistant polyester. Pure cotton or silk would sew up like a dream.

I really like the double, front button placket and collar/tie. I also love the loose bodice and drop waist shape. My front placket is far from perfect. I didn’t match my interfacing well enough to the fabric and buttonholes. There’s some puckering on the buttonholes which I find very annoying. I should have gone a little sturdier on the stabilising. Maybe it also would have helped if I’d lowered the stitch tension.

A size 7 in this pattern fits Miss Seven very well. The shoulder width and arm length looks good to me. I sewed the full length arms and they are probably designed to sit a little longer, but this length is very practical for a child. I’m not sure why the front placket is pulling up when the dress is worn. It could be that I tied the collar a little too tight. It could also be due to the way she is standing (with her shoulders back and arched slightly).

7

9

I’ll definitely sew this pattern again. My choice of fabric works beautifully with this style of dress. It’s a design that would also sew up exceptionally well in silk for a special occasion.

 

Daisy Chain Top for Miss Three

I made this  Daisy Chain top specifically to go with Miss Three’s fairy shorts. I salvaged my last little bits of fairy fabric and paired it with a little bit of white linen.

7

5

I bound the hem with self made binding in a floral that co-ordinates with the fairy fabric. Unfortunately, it doesn’t match perfectly. I didn’t have any suitable white binding on hand or enough fairy fabric, or any confidence that I would like the look of a top with fairies on it anyway. For the back placket, I made use of what buttons I already had on hand (quite boring but in the perfect subtle shade of pearl blush).

1

I’m not usually a fan of novelty fabric (heaven knows why I purchased the fairy cotton in the first place). My plan was to simply get those fairy faces out of my stash. It has, however, turned out to be one of the sweetest things that I’ve made for this child. I catch myself admiring her each and every time she twirls by.

2

4

 

Simplicity 1435 // A quickie Summer dress for Miss Three

I’ve made this pattern more times than I care to remember. It’s a very simple style that is both comfortable and practical. It whips together very quickly and always becomes a favourite.

I made the sleeveless version this time. I bound the neck and armscye in my own way, with my own self-made binding, but only because I didn’t bother to look at the pattern cover to see that the pattern also included this view, and therefore would have included binding in the pattern pieces had I chosen to look.

 

8

9

So, it seems that my little one hasn’t changed a great deal since I first made this pattern up for her. We’re still on a size 3. I’m sure she has grown a little bit taller, but she doesn’t sprout up at the ferocity of her bigger sisters. She truly is my little one.

4

The fabric I used for this dress is French terry, which is thicker and less fluid than what I’ve used before. I would have thought that this would have made for a closer fit, but it seems not. In general, I find that the sleeved versions of this dress are a lot more forgiving (and flattering) with fit.

This version (sans sleeves) is clearly comfy, but the wider fit through the shoulder seams (as required to fit the sleeves) isn’t the most flattering design. I’ll keep making it though. My favourite part of the dress is the complete lack of closures, which facilitates independent dressing, and lets me enjoy my morning cup of tea in peace.

3

Jaywalk refashioned

This time last year, I made myself a dress and a maxi skirt in some striped jersey fabric. The dress is no longer with me. I literally wore that dress to death. I still like the skirt in theory, but the length of it was a bit off-putting for everyday wear. It was a simple issue to fix.

This refashion was quick and easy. I chopped the top off the skirt, tapered the side seams in a bit to fit my hips better, and re-attached some elastic to the waist. The top I’m wearing is my Camilla camisole. It’s a simple, bias cut cami that fits beautifully.

17

19

20

I didn’t waste an inch of fabric in this refashion. The length I chopped off was just long enough to make a simple skirt for Miss Seven. I bought the side seams in by about 1.5 inches and shortened the elastic in the waist. She’s pretty chuffed because it fits the definition of a ‘fitted mini-skirt’ for her, which is something (along with heeled shoes) that I refuse to let a seven year old wear.

1

3

2

 

Wonderland Skirt // made by makers // and a flared version

Before I talk about how I modified my skirt, I’d like to share some of the great Wonderland skirts that have been made so far.

Carly in Stitches //Ernest Flagg // Miss Castelinhos

wond1

Tinker and Stitcher// Anna Gerard // Elle Gee Makes

wond2

And now for my modified version. Remember this scrapbuster? I unpicked the gathered portion of the skirt to see what it would look like with a flounce. I’m in the process of putting together a tutorial on how I did this. It’s not a difficult modification but it does change the look completely.

9

10

11

Seeing double: Simplicity 1435

Simplicity 1435 is my go-to kid pattern for easy knit dresses. I’ve made it a few times already for my littlest peep. This time I really stretched myself and whipped one up for Miss Five too. The fabric I used is a very drapey viscose knit. The fabric is quite heavy so it does drag the dresses down a little at the waist, but I’m fond of a drop waist anyway, and I just love those stripes.

1

These two girls are little peas in a pod. I spoke not a word during this photo shoot. It’s quite hilarious to watch them getting flowers for props and posing together.

5

3

Every time I make a dress using this pattern, it always becomes a firm favourite with Miss Three and I know why. Fuss free knit dresses are so comfortable. She can dress and undress easily as there are no fastenings and the layered skirt provides just the right amount of swish-factor.

7

Simplicity 1435 is a very simple pattern, a super quick make, and very practical for everyday wear. There’s nothing perfect about these versions. I whipped them up so quickly that the stripes aren’t precisely matched, but I know they will be worn to shreds. I just wish the little one would decide to like this dress too (which I think is utterly adorable), which hangs forlornly and completely ignored in her cupboard.

 

Jaywalk version 1

I’ve said it before, this fabric is gorgeous! Of course I was going to jump at the chance of entering Tessuti’s Jaywalk competition when this little beauty was put before me. The thing I love about this comp is that the rules are few and far between. You can basically make whatever you like, in whatever size, style or shape that suits you!

Stripes are so much fun and these were no exception. I loved playing around with the way they hung and swirled as I twirled. I actually made this skirt first, before my Jaywalk dress.  

 


I’m pretty happy with this make. It was my own design, but an oh so very simple one. The skirt consists of a pencil shaped portion with a generous graduated flounce at the bottom. I am most excited with the way that I managed to perfectly line up the stripes in the side seams, although this is hardly the work of a genius. Those stripes are perfectly on grain and I basted them in place to line them up first.

I stitched the elastic waistband directly to the reverse side of the top edge of the skirt in a zig-zag stitch and then folded it under twice (you can also do this on the right side of the fabric and fold it under once so the elastic sits against your skin). I copied the method from a FCUK skirt a few years ago and have been doing it this way ever since! You might remember the top as a Kanerva hack I made a little while ago.

 

And because this skirt is just so darn HOT, here a few more action shots. I kinda feel like a celebrity in these ones, but I like the way they show the skirt in motion! Now where did I put down my glass of Moet?

Sigh…paparazzo chasing me again. 

Obviously they want another shot of this booty-enhancing skirt… 

 But look, it also twirls!