I whipped up a matching top

The thing I love about sewing is that I really can just whip up anything at a moment’s notice. This top took all of ten minutes to make. It’s not perfect. The construction is basic. But I only had a few spare minutes and I desperately wanted to finish this up before I had to pack away my machine.

In hindsight, I really should have spent more time on it. I didn’t expect it to turn out quite so well though!

The striped fabric skirt is something you’ve seen before. I created it by sewing together strips of scrap fabric (in velvet, wool, and ponte). I ended up with a tiny bit spare that I used up in this top. There was not an ounce of wastage.

This is very fun outfit. I love the idea of perfectly matching separates as I think they produce an overall dressier look. However, when mixed and matched with jeans and other tops, these separates also dress down for a great casual feel.

Refashioned into a LBD

A few years ago, I was playing around with a top design that had slightly dropped shoulders and statement sleeves. One of my early versions of this top was more of a tunic, and I had a little fun with it by adding a front cut out and big bow. This top was eventually refined into a more (daily) wearable Branson Top.

I always intendeded to make a short sleeved, dress version of the top but never got around to it. I guess this refashion is the next best thing!

Grainline Archer refashioned

Unless my memory fails me, this was the second Grainline Archer I ever made. I think I ended up getting the fit right on my third try. I still wore the original version of this shirt, but it’s become way too tight across my shoulders since my return to the pool.

It was time to put this shirt to better use. I was lucky enough to have a decent sized remnant of the original fabric in my stash which meant I could go to town with my flounces. As beautiful as they are, flounces are very big fabric hogs!

I wish I took photos of my refashion during the process. I didn’t. However, I’ve drawn a few diagrams to help. It wasn’t a complicated refashion. I started by cutting off the sleeves of the shirt. Then I pencilled my intended seam on the remainder of the shirt. The diagram below shows the new seam I created. The front seam is red (on the front shirt pieces) and the back seam is green (imagine it on the back shirt pieces). Both are connected at the shoulder seam. I wanted the diagonal seam to be wider at the shoulder yoke seams and more medially placed towards the shirt hem. I brought the seam closest to the CF in the front of the shirt. The scariest bit was cutting along this seam and keeping both sides exactly even! After cutting, I then had three shirt pieces that I needed to stitch back together, taking into account the new seam allowances that would be eating into my shirt size!

For the flounce, I simply measured the entire length of the new seam and used that as a reference for the curved edge of a flounce. A flounce pattern piece is basically a big circle. I made mine a bit wider at the centre point (the area covering the shoulders). I also added an extra four inches (approx.) to the length of my flounce as I knew I wanted to add a couple of pleats over the shoulder region. The diagram below is an approximate representation of my flounce piece. Imagine it trued and smooth in real life!

I faced the flounce with self-bias-binding before I sandwiched it between the pieces of shirt. And once the flounce was attached and the shirt was in one piece again, I tried it on. I used 1cm seam allowances with my new seam so I knew that I lost exactly 8cm in shirt girth by inserting the flounce (2cm on each front and back seam). To compensate this, I decided to add contrast white panels down the sides of the shirt. This alteration in turn, would eat up another 2cm on each side of the shirt. So, I measured 8cm wide panel pieces to attach to the sides. The panel width is 6cm (incl. 2cm of seam allowances). These side panels returned the shirt to the same shirt-fit as before. I then bound the armscye and hemmed the bottom a little straighter and shorter than before.

I’m not joking when I say that this is my new favourite skirt. I’ve already worn it a lot. It pairs beautifully with skirts for an elegant evening look. But I also love it with jeans when I’m aiming for polished casual.

Cold shoulder refashion

frame2

The off the shoulder and cold shoulder trend is still around. I also know for a fact it will still be here when Spring RTW hits the stores sometime in the new year. However, I personally need a break from the style. I’d also like to have warm shoulders during Winter. I’m all about comfort in cold weather. If it isn’t soft and warm, it won’t get a look in, no matter what.

Not everything is worth refashioning, but this particular top was. The fabric is a beautiful pure cotton Italian jersey. It is a smooth, lightweight knit without the addition of any other fibres or elastic, so it washes beautifully and wears well. The fabric deserves to be worn, which is probably why this top has been modified so many times.

It started as an off the shoulder top. But I hate strapless bras so after the first few wears, I made it more wearable by adding shoulder straps to conceal a bra. However, this top does not suit being worn under a jacket or even on it’s own in Winter for that matter.

I had a cotton/viscose cardigan in my closet that was given to me (that I was never going to wear), so I used that to replace the missing shoulder portion of the original top. I sliced the elastic and shoulder straps off my cold shoulder top (in a straight line). I then placed the cold shoulder top over an existing top and used that as a guide to cut the shoulder portion from the cardigan.

frame3

If I’d been working with a plain T instead of a cardigan, I could have simply sewn the top portion on to the cold shoulder top. However, the cardigan needed a little more prep. I overlapped the front, removed the neck ribbing and then reattached it. I also gathered the sleeves to fit the cold sholder sleeves (which were more fitting). This is my favourite feature of the new top – those little puffs above the old sleeves. Why am I feeling puffy sleeves so much lately?!

frame6

frame5

frame1

I love my new top. I loved the old versions too. If it were Summer all year round, I may have kept them, but I’m going to get so much more wear out of this beautiful fabric now.

A refashion fest

It is still quite warm here in Kansas City. In fact, today the heat was back in full force. But mostly, this time of year is gorgeous, with less humidity, cooler nights, and pleasant days. I’m still not inspired to get on with my coat-making, but I have been thinking about my Fall wardrobe plans.

I’ve been pulling out the sweaters and going through my wardrobe to look for gaps. One thing I also do between seasons is to assess the clothes I own and identify what I don’t like anymore (and what I can possibly refashion). It’s amazing how much you can do with existing clothes to update an entire wardrobe without purchasing/making a thing.

You’ve already seen the culottes that I narrowed to refresh into a boxier shape that is more current for this year. I also shortened this floor-length velvet dress. I LOVED the glamour of the maxi version and I wore it for the holidays last year, but my life doesn’t call for floor length gowns very often. I tried it as shorter dress but I still didn’t feel the love.

boots3 boots4

A little more cutting (and hand-stitching that hem for the third time!) and now it’s become a top that I’m really in love with! I’ll get tons of wear out of it in this version and the portions I cut off the dress can be reworked as a garment for one of my girls.

velvandj4 velvandj3

velvandj2

Slip dresses have had their moment this Summer, but they’ll also be great for going into Fall. Remember this dress? It was my go-to out-to-dinner dress over Summer, but I’m getting bored of the cold shoulder look (at every turn in my wardrobe anyway!). I cut off the sleeves and rebound the armscye, adding small spaghetti straps to drop the neckline a little. Now I have a slip dress that I can wear alone or layered with a turtleneck and boots.

biasslip1

I’ve also been playing around with layering. I dug out this old playsuit that I made using a vintage pattern years ago. Layering it makes for such a comfy and seasonally appropriate combo.

Even though I already liked this thrifted vintage dress a lot, it was a tricky one to wear in real life. The weight of the fabric meant it was way too hot for Summer, and yet the style doesn’t really suit colder weather. Converting it to a top has made it much more wearable for me, and the fabric is the perfect weight for Fall.

img_2794

I’m also a little in love with dramatic sleeves right now (same as always, right!). But instead of sewing myself a brand new top, I cut the cuffs off an existing shirt and drafted my own big, fancy cuffs to re-attach. This totally elevates the basic white shirt and is going to make my Fall layering just a little bit more… me. There’s a post about this refashion here.

fl3

And while I was at it, I trimmed back and re-bound the armscye of this pretty little top. The fabric is divine but I found the original shape a bit boxy/masculine with the wider shoulder seams. I think it will now work better with more separates. I’ll try to get some photos posted soon.

And finally, I’m also a little tired of the torn denim, bare knee jean, so I took an old vintage skirt and used it to patch up my white denim. These jeans are now so fun and I can’t wait to pair them with a snuggly sweater in the coming months. More photos coming soon on this one too.

It’s actually been a lot of fun finding and reviving hidden treasures in my wardrobe. Does anyone else attack their wardrobe with scissors between seasons?

Black trimmed lace dress

I made this dress some time ago and entered it into the Tessuti cut out lace competition. However, I always had bigger plans for it. Here are some updated photos.

blace2

blace9

Pretty much all the details are the same as before. I simply unpicked all the extra overlay that I’d handstitched in place over the shoulder straps, and turned the black trim back to the outside. There was a little seam-ripping and re-sewing involved but it was worth it (and easier because I’d made allowances for the changes to begin with).

blace10

Now it’s just a shame that Summer is edging away from us. I’ve probably only got a few weeks of lace left but I will enjoy it while I can.

blace12

blace7

blace4

blace12

blace6

Flared sleeve shirt refashion

I’ve always been a bit partial to a statement sleeve. And right now, flared sleeves, bell sleeves, and even gathered sleeves are just about everywhere.

I want to share with you a quick way to update an existing collared shirt, or any shirt for that matter. I started with a a basic white button up. Mine was purchased from Target for a grand total of $22, specifically with this project in mind. I toyed with the idea of sewing myself a shirt from scratch for all of five seconds. But as you should all know by now,  I’m not so in love with sewing basics.

fl6

I started by cutting the cuffs off a basic shirt and with them, about six inches of sleeve. I then measured the circumference of the cut portion of the sleeve and used that as a guide to draft the new cuff.

img_1653

I drafted a new cuff (just a big rectangle) that measured 8.5 inches in width and 12 inches in length (including a 5/8″ seam allowance). The cuff width allowed for a three inch overlap, to line it up with the underarm sleeve seam when sewn in place. I then slashed and spread the cuff to turn it into a flared design. See the picture of the new pattern piece (below) to get an idea of the amount of flare. The pattern piece is cut on the fold and two cuffs need to be cut (one for lining, one for outer fabric).

img_1654

Because of the size of these new cuffs, I chose not to interface them, which turned out to be the best decision. I also played around with the position of the overlap/slit of the cuff and found it worked best (appearance and practicality) when it was positioned on the underside, with the back overlapping the front. This positioning suits the natural movement of the arm better.

fl3

I’m delighted with my modified white shirt. I’m currently considering which other shirts in my wardrobe might need a similar update.

fl5

fl2

fl4

 

 

 

Grainline Archer // vintage sheet shirt

So, I loved Miss Seven’s vintage sheet shirt so much that I just had to make my own. Here it is.

7

3

6

My Grainline Archer has been modified to accommodate my standard broad back/long arm/height requirements. I also added a classic, tailored sleeve placket, and two fish eye darts in the back.

 

 

 

Grey knit dress twice over // And a quick how-to

Inspiration usually hits me like a brick. One minute I want for nothing and the next all I can think about is a long sleeve, grey, knit dress.

 

8

 

7

6

My first thought was to make it from scratch. I already had a personal pattern for a sleeveless, fitted knit dress. I just drafted sleeves and extended the sleeve arms and the (ever so slightly tapered) bottom hem to the length I wanted.

You could easily modify any closely fitted T-shirt pattern to make a dress like this. I was going to look up some patterns for you, but Creative Chick has already done the research and I see no point in re-inventing the wheel. Check out her very comprehensive summary list of top patterns, with a quick description of each. For a dress like this, you will need a close fitting T and very stretchy jersey. A wide variety of necklines would suit it.

Once you have a T-shirt pattern that fits perfectly, simply extend the arms in a tapered fashion to the length you want. I’m fond of ultra long arms right now so I extended mine beyond the wrist. Use your fitted T-shirt as a guide when extending your pattern pieces. The diagram shows my extended dress outline in red and my measurement guide in green and black. My fabric had a lot of stretch, so I didn’t need to add any darts for shape. I simply narrowed the waist to avoid too many lower back wrinkles. Stable knits will need bust darts and back darts for a fitted look.

knit dress

I used a lofty, stretchy, wool/acrylic blend, sweater knit for my first version. I’m sceptical of how long the fabric will last, but right now, I’m totally in love with it. In fact, I liked the dress so much that I immediately made a second.

12

My second version is a little more interesting. It’s a truly awesome pure wool ponte knit from Tessuti Fabrics. I’m labelling it truly awesome because it is warm, thick, has great recovery in a stable, ponte-style stretch, has been machine washed more times than I can remember, and just between you and me, I often throw it in the dryer in winter so I can wear it more frequently. It’s possible that the fabric may have faded a bit, but not that I can tell (it’s grey after all), but there is no pilling, no thinning, no stretching, no shrinking, and no other major signs of wear. It cost me a pretty penny but it has been worth every cent.

There’s also a story behind this fabric. In a fit of panic at the idea of landing in Kansas during the infamous polar vortex of two years ago, I purchased several metres of it before I left Australia. I used it to make myself two winter dresses. One was a drop waist Malvarosa and although the loose fitted style had me on the fence, I ended up wearing that (pyjama) dress almost daily for two consecutive winters. I also made myself a fit and flare dress (modified significantly from V8805) and a few other winter items for my girls. The contrast skirt on this second dress didn’t fare as well as the grey ponte knit so I cut it off last year and turned the dress into a simple long sleeve top. I don’t have photos of the top because it was just a wardrobe staple and not blog worthy at all.

When I made the top last year, I removed the (nursing friendly zipper) from the original dress and simply joined the front seam. I also finished the neckline and sleeves with black cotton ribbing. The top was functional, but probably not the most glamorous item in my wardrobe. I didn’t particularly like the neckline. It was just a bit wide for my taste. So for this knit dress, I wanted to see what I could do to fix it. Simply unpicking the original (serged) neckline would have been arduous and wouldn’t have fixed the size and width problem. My solution was to draft a (slightly) stand up collar, that I then attached directly to the existing binding using a small seam allowance. The effect is a contrast line of ribbing between the  collar and dress which I absolutely love.

16

 

This second knit dress was made completely on the fly. The sleeves are possibly a smidgen too long (I got carried away with my length obsession) and there was a lot of (bulky) seaming involved in achieving the length I wanted. Because I was dealing with a more stable knit fabric, I kept the original bust darts and added two fish eye darts to the back for shaping.

14

I love how my two versions turned out. Here are a few more RTW examples for your inspiration.

PicMonkey Collage

Love Culture            //            Proenza Schoeler             //           Banjo & Matilda

 

 

The last refashion

This fabric really has been around the block. It started as a dress. Then I turned it into a playsuit. And now I’ve shortened the legs again. Shortening the legs is hardly deserving of the word “refashion”. However, there’s are reason I’m showing you this. It’s amazing how significantly different a garment can look, after such a minor change.

22

24

26

I didn’t mind the previous versions, but none of them were quite right. I’m so glad I persevered.

Shop the Look

6 Shore Road by Pooja // Aqua // Banana Republic

2