Black trimmed lace dress

I made this dress some time ago and entered it into the Tessuti cut out lace competition. However, I always had bigger plans for it. Here are some updated photos.

blace2

blace9

Pretty much all the details are the same as before. I simply unpicked all the extra overlay that I’d handstitched in place over the shoulder straps, and turned the black trim back to the outside. There was a little seam-ripping and re-sewing involved but it was worth it (and easier because I’d made allowances for the changes to begin with).

blace10

Now it’s just a shame that Summer is edging away from us. I’ve probably only got a few weeks of lace left but I will enjoy it while I can.

blace12

blace7

blace4

blace12

blace6

Cut out lace dress 2

I never intended to make two dresses with this fabric. I had less than a full panel remaining after finishing my main entry. I toyed with turning the leftover bits of lace into a top for one of my girls, but my sewjo just couldn’t get behind that idea. It seems that I needed another white lace dress in my closet.

lla5

I spent way too much time mulling over the positioning of the lace, perhaps even more so with this one because my options were limited. To achieve symmetry with the scraps I had on hand, the bodice had to be seamed down the CF in addition to the princess seams. I didn’t have much choice with the lace placement for the skirt. I like the way I was able to place the lace in the front and whilst I also like the back, it’s perhaps not as cohesive through the sides as I would like. The dot-lace hem is seamed on.

IMG_1235

Design-wise, this dress is very similar to my previous entry. The princess-seamed bodice is almost the same, but with a slightly more scooped out neckline and skinny, self-fabric straps. The skirt portion was modified from one of my TNT pencil skirt patterns. I slashed and spread the pattern slightly into a subtle A-line shape for a more casual fit. I absorbed the back darts through the flare and back waist seam.

lla4

The bodice is unlined, but the skirt is lined. I faced the neckline raw edges with bias binding. The skirt is lined with a beige coloured acetate. I kept the skirt lining as short as possible so as not to be seen through the bottom panel of the hem. I won’t be bending over in this dress!

lla11

lla14

lla10

Like my other dress, this dress is also designed to be worn with a very specific bra (the one I wore in the last lace dress post). You can see that the bodice fits a lot better when I wear that bra here (and I will be wearing it in real life). It is mostly unseen behind the straps, but for a cleaner look in some of these photos (since I didn’t have a wardrobe assistant on hand to check for strap visibility), I decided to wear a strapless bra. The fit is just not as good across the bust when I have to resort to a strapless bra. It’s a very good reminder of how undergarments affect the outer fit.

Also, try to ignore the big smear of white paint across my calf… maybe we should start a game called, “Spot the Paint on Her”, in all my blog photos for the next six months….

lla6

lla7

 

A little Target knock-off for Miss Eight

Even though I sew a lot of clothes for my daughters, I’m not averse to shopping the Target clearance racks. I often find little gems there that I generally couldn’t make for the price on the tag (and this always takes a bit of pressure off my sewing to-do list).

The other day, I picked up a very simple, loose fitting top for Miss Six that Miss Eight immediately fell in love with also. My eight year old and six year old are very similar in size now and the top easily fit them both. All I had to do was rub off an exact copy for the older child.

coco1

coco6

The top is kind of a peasant style, but with little flutter sleeves and a front bodice with shoulder seams that swing around towards the back. The trickiest bit was navigating the angle of the shoulder seam and trying to determine the shape and depth of the armscye because in stretching out the elastic neckline to do so, I was also pulling the top out of shape. I came close to getting it right but I will have to angle the shoulder seam down more next time and raise the armscye. Otherwise, we’re all delighted with how the little top turned out.

coco5

I used my leftover vintage voile (from this dress). It’s very sheer, so she’ll wear a nude cami under the top. On the topic of kid undergarments, I bought her a few of these camisoles the other day (no affiliate link, I just think they are a great product). They are beautifully smooth and fitted, with little adjustable spaghetti straps; an exact, mini version of something I would wear. They are a more elegant option than the traditional singlet for an eight year old and I think this “grown up” appeal is why they may actually get worn. I bought them mainly to be worn as an extra layer during Winter. They’d be easy to sew, but y’all know how much I love sewing staples…

coco2

The shorts are a little version of my Cartwheel Shorts pattern that I made without the front pleats for a little less volume. I used my leftover vintage linen/lace tablecloth (seen also here). I think these shorts look adorable on her. If you follow me on IG, you may have seen the matching pair that I made for Miss Six too. She’s very proud of her artwork!

 

Cut out lace competition dress

I know I should sit on my competition entries like everyone else, but it’s like sitting on a hot potato, especially since I couldn’t wait to get started on this one. It’s finished, photographed, and I’ll be squeezing in as many wears as possible before Fall, so I figured I might as well share it! The inspiration came from THIS dress that I posted on my IG account a few weeks ago.

As soon as I saw the ivory lace, I knew exactly what I wanted to make with it. The only problem was that the rules stated that no trims could be used and that the outer fabric of the garment had to be made entirely of the competition fabric, and in a single colourway only. That was a big problem. The contrasting black trim against the ivory lace was the element that I most liked about my inspiration dress.

alace12

It took me a bit of thinking to come up with a solution, and a LOT of hand-stitching post construction. However, I found a way to keep all my black trim to the underside of the lace fabric and in a manner that I could reverse in the future. With the trim kept to the inside, the contrast is muted through the lace, but still visible as a subtle feature.

This is a post about my competition dress. I will share more pictures one day after I have unpicked all my handiwork to reveal the black trim again.

I designed this dress using a combination of flat pattern-making and draping. I tried very hard to design a bodice that would be low cut (and slightly shaped) in the back, yet with straps that would conceal my favourite bra. I think I did a pretty good job.

alace9

lace4

lace5

I also tried to position the lace in such a way as to avoid lining the bodice. I wanted the dress to show glimpses of skin through the lace rather than lining. But I also didn’t want the dress to be too revealing. The bodice isn’t lined at all but the ruffle provides a little extra coverage. The skirt has a short lining. I couldn’t quite manage to place the lace of the skirt in such a way that would cover my bottom completely.

The lining I used for the skirt is an ivory/beige coloured acetate. I gathered the lining in my dress rather than pleating it because I wanted to add a bit more bulk through the skirt. And that is the beauty of sewing your own clothes. My hips are narrower than my shoulders and this difference gets a little more pronounced the fitter I get so a gathered lining in the skirt helps me achieve an illusion of filling it out better and having a more hourglass figure. (I blame Pokemon, the Olympics, and active kids for getting me out running and swimming laps everyday this Summer!).

I made the straps using wide, black, foldover elastic (FOE). The gathered sleeves are sandwiched between the fold and then the entire length of the elastic is stitched down to create an enclosed strap. I used a very strong/stable FOE. Too much stretch would have made for weak straps, but a little bit of firm stretch and a lightning stitch creates very comfortable and strong shoulder straps.

download (1)

The sharp contrast of black against ivory in the shoulder straps was what my heart desired, but I compromised by using it as a strap lining instead. I created lace tubes to cover those black elastic straps and hand-stitched them in place. I’ll remove those lace tubes at a later date.

I also encased the edges of the lace ruffle in black, self-made, silk binding. I then turned that trim to the underside and hand-stitched it in place. I like that I can still see a glimpse of the black through the lace. To cover the very edges of the black binding (near the neckline and CB zipper), I cut tiny squares of the competition fabric and appliqued them over the visible binding. The result is a dress with outer fabric made completely of the competition lace.

alace2

lace7

alace6

I’m so pleased with how this dress turned out. I will definitely enjoy wearing it during the last few weeks of Summer. Meanwhile, there’s still plenty of time to enter the competition and if you don’t like ivory lace, there is also red and black to choose from. I have less than a full panel remaining of my ivory lace, but I think I’ve just worked out a way to scrapbust it into another little frock!

alace5

 

 

White lace dress

One great thing about living in the USA is that my birthday is in Summer here! I’m so much more inspired to dress up and head out for the night in the middle of Summer. The end of June always seems so cold and dark in Sydney (relatively speaking).

To be perfectly honest though, I’ll use any excuse to sew a nice dress. Yes, there’s still over a month until my birthday, but several years ago I came up with best birthday strategy ever. For the next month, many sentences will begin with, “It’s my birthday soon, so…”. If I really stretch it, I can milk my birthday for a good eight weeks, which could possibly turn into several dinners out, maybe some new shoes, fabric…and you’ve already seen my “birthday” sunnies if you follow me on Instagram.

whitelace2

whitelace5

But let’s get back to the birthday dress. It is my own design, albeit a very simple one, and also one you’ve seen before. The skirt is the only real part of the design I changed, moving and adjusting the pleats a bit to create the volume and shape of the skirt. I also moved the zipper to the back and left it exposed (because it is a bit fancy!).

whitelace10

whitelace11

I’ve been calling the outer fabric lace, for want of a better word. Perhaps it is, perhaps it isn’t. It is actually faux leather embroidered on scuba mesh. Surprisingly though, it is very stable. There isn’t much stretch in that mesh so I was able to turn the fabric on the cross grain to utilise the mesh edging/selvedge as a hem. I decided that the lining needed to be black for contrast and cotton for breathability under the spongy synthetic exterior.

Now, the construction of this dress is where things went a little Pete Tong. My original plan was to partially line the bodice, just like this blue Milly dress. However, after sewing all the seams  (of the outer fabric) and serging them, I realised that the underside of the lace was so hard and scratchy that the dress would be unwearable if it was left even partially unlined. I could have used silk organza blocked into the top part of the lining and sewn it as a full lining, but I didn’t have the right shade of nude on hand and I just wanted to get on with it.

My solution was to first bind the armscye of the outer lace. Then I sewed together the lining in full and attached it to the lace at the neckline. Then a lot of hand-stitching ensued. I slip-stitched the lining to the armscye binding and down the centre back. The dress is actually very close to passing as reversible.

I’m very happy with the fit. It shouldn’t be a surprise, but I think I will always feel an element of surprise and delight when I step into a garment that is perfectly molded to my body. It’s a sensation that I’ve never felt with RTW.

whitelace3

whitelace4

And while we are speaking of perfect fit… I drove past an estate sale last week and bumped into the impeccable Jill Sander shoes that you see in the photos. They were not only my exact size, but comfortable, possibly unworn, and totally meant for the dress I was sewing. I felt like Cinderella!

Vintage lace cold shoulder ensemble

You’ve seen me sew up a few cold-shoulder garments this season. I love them! I particularly love this style because it is cool, loose-fitting, and not at all restrictive. It’s become my go-to style this Spring.

ll3

ll4

ll5

ll2

The fabric came from a vintage, linen tablecloth. Beautiful linen tablecloths are at every estate sale here in Kansas City. I’d like to say, “a dime a dozen”, but they are never ever a dime. They are usually priced anywhere from $10 to $150. I loved this one as soon as I saw it, but I wasn’t prepared to buy it at full price. So I crossed my fingers and went back to the sale on the last day and bought it for $40 (50% off). It’s a huge tablecloth (2m by 4m) and the linen is of a beautiful quality, without any stains or tears. It is densely woven, with a fine texture, and quite opaque, but still lightweight enough for garments. In  my opinion, it was a steal.

ll9

I didn’t stop at the top though. I also made myself a pair of matching shorts, inspired by the one and only Sophie (Ada Spragg). I still have a lot of leftover fabric. This is the tablecloth that never stops. And the best bit about it is the very ample lace edging. I love the look of the lace, but I also love the fact that incorporating it in as the hem of a garment makes for a very quick sew (no hemming!!!).

lla5

lla4

 

 

DIY ponte and lace bodysuit

I find the idea of muslins for stretch knit garments a funny thing to get my head around, especially in the case of swimsuits and bodysuits. Personally, I don’t have any stretch “muslin” fabric lying around, and yet, none of the stretch fabric I own is particularly precious. And then there’s the fact that only a tiny bit is required for the suit anyway. I usually opt to make a wearable muslin in a case like this, even though I may end up making it up again as a real version, in exactly the same fabric!

6

This bodysuit is a wearable muslin. It’s a shape and fit that I haven’t made before so I was entirely unsure as to how it would work out. I used a few of my swimsuit patterns as a guide for the body shape and length, and then adjusted the size according to the less stretchy ponte fabric that I was using. The bottom of the bodysuit has a pant shape similar to my Splash Swimsuit.

5

4

I ended up having to adjust the side seams quite a bit before I was happy. I also completely re-designed the back halfway through construction. And that’s why you can see that the lace on the back has been finished with FOE on the top edge, but all the ponte has raw edges. Ponte won’t fray, so it was always my intention to leave the edges raw in this version (the lace was a different matter). I’ll spend more time finishing the shoulder straps and neckline next time round. I may still leave the pants unfinished though because the unfinished edges on the legs give a very smooth finish against the skin and under clothes. You’d be seeing a panty line in my jeans if the edges were finished with elastic.

11

I totally love this look of black on black for Summer right now. In my mind, it’s a little bit 90’s,  especially when you also consider the return of chunky, blocked heels (that are so comfy, but oh so reminiscent of dancing through the night to George Michael music videos with his bevy of supermodels). The nineties were the first real era of fashion that I lived through and actively participated in (it doesn’t count if you were too young to buy your own flouro socks and hypercolour T’s in the 80’s!).

15

Top: Made by me / Leather skirt: vintage / Jeans: James Jeans / Shoes: Loeffler Randall