Cut out lace dress 2

I never intended to make two dresses with this fabric. I had less than a full panel remaining after finishing my main entry. I toyed with turning the leftover bits of lace into a top for one of my girls, but my sewjo just couldn’t get behind that idea. It seems that I needed another white lace dress in my closet.

lla5

I spent way too much time mulling over the positioning of the lace, perhaps even more so with this one because my options were limited. To achieve symmetry with the scraps I had on hand, the bodice had to be seamed down the CF in addition to the princess seams. I didn’t have much choice with the lace placement for the skirt. I like the way I was able to place the lace in the front and whilst I also like the back, it’s perhaps not as cohesive through the sides as I would like. The dot-lace hem is seamed on.

IMG_1235

Design-wise, this dress is very similar to my previous entry. The princess-seamed bodice is almost the same, but with a slightly more scooped out neckline and skinny, self-fabric straps. The skirt portion was modified from one of my TNT pencil skirt patterns. I slashed and spread the pattern slightly into a subtle A-line shape for a more casual fit. I absorbed the back darts through the flare and back waist seam.

lla4

The bodice is unlined, but the skirt is lined. I faced the neckline raw edges with bias binding. The skirt is lined with a beige coloured acetate. I kept the skirt lining as short as possible so as not to be seen through the bottom panel of the hem. I won’t be bending over in this dress!

lla11

lla14

lla10

Like my other dress, this dress is also designed to be worn with a very specific bra (the one I wore in the last lace dress post). You can see that the bodice fits a lot better when I wear that bra here (and I will be wearing it in real life). It is mostly unseen behind the straps, but for a cleaner look in some of these photos (since I didn’t have a wardrobe assistant on hand to check for strap visibility), I decided to wear a strapless bra. The fit is just not as good across the bust when I have to resort to a strapless bra. It’s a very good reminder of how undergarments affect the outer fit.

Also, try to ignore the big smear of white paint across my calf… maybe we should start a game called, “Spot the Paint on Her”, in all my blog photos for the next six months….

lla6

lla7

 

Cut out lace competition dress

I know I should sit on my competition entries like everyone else, but it’s like sitting on a hot potato, especially since I couldn’t wait to get started on this one. It’s finished, photographed, and I’ll be squeezing in as many wears as possible before Fall, so I figured I might as well share it! The inspiration came from THIS dress that I posted on my IG account a few weeks ago.

As soon as I saw the ivory lace, I knew exactly what I wanted to make with it. The only problem was that the rules stated that no trims could be used and that the outer fabric of the garment had to be made entirely of the competition fabric, and in a single colourway only. That was a big problem. The contrasting black trim against the ivory lace was the element that I most liked about my inspiration dress.

alace12

It took me a bit of thinking to come up with a solution, and a LOT of hand-stitching post construction. However, I found a way to keep all my black trim to the underside of the lace fabric and in a manner that I could reverse in the future. With the trim kept to the inside, the contrast is muted through the lace, but still visible as a subtle feature.

This is a post about my competition dress. I will share more pictures one day after I have unpicked all my handiwork to reveal the black trim again.

I designed this dress using a combination of flat pattern-making and draping. I tried very hard to design a bodice that would be low cut (and slightly shaped) in the back, yet with straps that would conceal my favourite bra. I think I did a pretty good job.

alace9

lace4

lace5

I also tried to position the lace in such a way as to avoid lining the bodice. I wanted the dress to show glimpses of skin through the lace rather than lining. But I also didn’t want the dress to be too revealing. The bodice isn’t lined at all but the ruffle provides a little extra coverage. The skirt has a short lining. I couldn’t quite manage to place the lace of the skirt in such a way that would cover my bottom completely.

The lining I used for the skirt is an ivory/beige coloured acetate. I gathered the lining in my dress rather than pleating it because I wanted to add a bit more bulk through the skirt. And that is the beauty of sewing your own clothes. My hips are narrower than my shoulders and this difference gets a little more pronounced the fitter I get so a gathered lining in the skirt helps me achieve an illusion of filling it out better and having a more hourglass figure. (I blame Pokemon, the Olympics, and active kids for getting me out running and swimming laps everyday this Summer!).

I made the straps using wide, black, foldover elastic (FOE). The gathered sleeves are sandwiched between the fold and then the entire length of the elastic is stitched down to create an enclosed strap. I used a very strong/stable FOE. Too much stretch would have made for weak straps, but a little bit of firm stretch and a lightning stitch creates very comfortable and strong shoulder straps.

download (1)

The sharp contrast of black against ivory in the shoulder straps was what my heart desired, but I compromised by using it as a strap lining instead. I created lace tubes to cover those black elastic straps and hand-stitched them in place. I’ll remove those lace tubes at a later date.

I also encased the edges of the lace ruffle in black, self-made, silk binding. I then turned that trim to the underside and hand-stitched it in place. I like that I can still see a glimpse of the black through the lace. To cover the very edges of the black binding (near the neckline and CB zipper), I cut tiny squares of the competition fabric and appliqued them over the visible binding. The result is a dress with outer fabric made completely of the competition lace.

alace2

lace7

alace6

I’m so pleased with how this dress turned out. I will definitely enjoy wearing it during the last few weeks of Summer. Meanwhile, there’s still plenty of time to enter the competition and if you don’t like ivory lace, there is also red and black to choose from. I have less than a full panel remaining of my ivory lace, but I think I’ve just worked out a way to scrapbust it into another little frock!

alace5

 

 

Authentic 70’s cold shoulder blouse

I’m calling this authentic because the thread and the fabric were both picked up at an estate sale. It’s plausible that the fabric is from the 70’s. It certainly looks the part.

sev7

sev6

To be perfectly honest, most of the fabric I find at estate sales is truly awful. There’s lots of old, rough quilting remnants, ugly home deco cottons, and dusty poly knits. The pricing is often absurd too, clearly valued by people who know nothing about fabric and sewing. I walk past a lot of rubbish. However, every now and then I find a gem and a bargain.

This fabric was a part of several bundles that I found at one particular house several months ago. Each bundle was $1-3 and contained 3-5 remnants of varying lengths. I was immediately apparent to me that some of the fabric was of high quality, but sometimes it’s hard to tell the exact fibre content of a fabric without a burn test, particularly with “nicer” synthetics. So I nabbed three of the more appealing bundles and took them home to inspect more closely.

Subsequent burn tests revealed a LOT of silk in that bundle, including this absolute gem. Needless to say, I popped back to the sale later that day and grabbed the remaining decent bundles. I ended up with several long lengths of pretty silks, two really long lengths of Liberty of London (one was a wool blend), and a few nice poly and cotton florals. Some prints are old fashioned, but even so, are still delightful for the right project.

I was able to determine that this particular floral fabric was a synthetic. It doesn’t press. It definitely melts (please don’t ask me about this!)! It’s stiffer than a silk chiffon. It’s not my kind of fabric at all, but I LOVED the 70’s vibe of the print. It was going to make the perfect partner for my suede mini and flares.

sev8

sev10

I wasn’t planning to spend much time or effort on a horrid poly like this but I didn’t have a lot of choice. I needed to bind the raw edges somehow. Self-fabric binding would have been beautiful (but an awful job with a fabric that won’t hold a crease). My solution was to use some sheer pink, silk organza that I already had on hand. Obviously, silk organza presses well but I’ve never used it for bias binding before. It’s a very crisp fabric to begin with but after several washes, silk organza turns super soft. It was the perfect compliment to this sheer blouse.

sev5

sev1

 

 

A blue cotton top

I’m putting this top to bed. I like it from some angles and not from others. I might still wear it, or I might cut it up and modify it, but I don’t think I want to make another.

2

7

6

4

The fabric that I’ve used does it no favours. It’s a denim-look cotton shirting with just enough stretch to keep the bound armscye and neckline permanently wrinkled, despite a good pressing.

Perhaps I could lower the neckline and change the shape of the front armscye, or add darts, but I’m just not loving it either way. And I need to love it if I’m going to spend any more time on it. Sometimes you just have to let things go.

3

 

 

 

Long sleeves in linen

I started sewing clothes for myself in 2012. Before that, my sewing was all about kiddie stuff and quilting cotton. It was also the year I discovered that I could sew with ponte knits and linen. I quite simply overdosed that year. Lucky for you guys, this was also before I started blogging.

I’ve always loved linen, but it’s one of those fabrics that I rarely, if ever, saw in the RTW shops I frequented back then. So it was mindblowing to me that I could suddenly make everything in linen. So did I? Yes. I. Did.

I’ve since had a few years without a lot of linen in my wardrobe. There’s been the odd thing, but nothing like it was in 2012. However, I feel the season changing. I am so in love with it right now. It’s like my long lost friend has returned.

blur side

back blur

blur 1

The thing about linen though, is that it is one of the fabrics I am most pickiest about in terms of quality. I loath buying it online. I’ve been disappointed a few times when I’ve opted for the cheaper option. I recently purchased a length of European white linen from Fabric dot com. In the description it was recommended for making dresses, pants, anything. Let’s just say, I’m ditching the idea of using it for a Summer top and might simply hem it for use as a pretty table cloth instead. I think I’m a linen snob.

The linen I used for this top came all the way from Tessuti Fabrics in Sydney, one of the few places I trust implicitly in buying linen from without ordering a swatch first (online shopping is sadly my only way to purchase quality fabric in the Midwest). This linen is truly delicious. I could iron it better, but I really, really love linen crinkles.

front close

back close

This top is the long sleeve variation of a pattern I’m working on right now. I paired it with my long leather shorts.

If everything goes to plan, I might be ready for testers in a few weeks. It takes time because I want to make sure that even my testers get a good experience.  If you are interested in testing this or anything else in the future, please head over to my Facebook page, Lily Sage & Co. To avoid driving non-tester inclined blog readers batty,  I will only be putting the tester call out there from now on.

FBA test top

It’s quite obvious that my bust is not so full that it requires any pattern adjustments, but in the interest of testing for the wider population, I thought I’d see what this top could do. It was a very easy adjustment to create more room in the front of this top. Because I don’t *fill* that space, I’m left with bigger gathers. I think I prefer my earlier version better in terms of fit (for me).

4

2

This version was made very simply in a medium weight, quilting cotton. The fabric is pretty, but not really my style. To toughen it up a little, I paired it with my very versatile neoprene and faux leather mini.

7