Burdastyle paper bag waist pants

This was one of those projects that I made at a completely inappropriate time. I made them about four months ago, just as the Winter weather was starting to kick in. I still haven’t worn them. It’s not because I don’t want to though. Loose linen pants just cannot be equated with a Kansas winter, inside or outside. It’s still far to cold to wear them (-11C today) but I can now see Spring on the horizon, which is possibly why I finally found the inspiration to take some photos. They will make the most delicious Spring pants ever!

Remember the military green shorts I made at the end of Summer? I used the same Burdastyle (111A) pattern for these. I made exactly the same adjustments, but just refined them a little. I shortened the top ruffle by about one inch. It was just a smidgen too high in the shorts. I love the drama of the shorts (and will still wear them) but a too high ruffle flops down a bit by the end of the day. Perhaps a bit of interfacing would help this out though.

Like the shorts, these are also made with beautiful milled linen from the Fabric Store. The shade of pink is so pretty. There’s a lot of pale pinks coming out in Spring RTW right now. Perhaps that’s influencing me a little with colours. I do like a good neutral though.

Honestly, I can’t remember if I lengthened these pants or not. I may have (I usually do with everything), but I do remember cutting off some at the end as well. I think the pattern is designed to be very long in the legs.

On another note, I haven’t really been in a position to sew much over the past six months but I think things are slowly changing. I purchased and printed an Oslo Coat last night. I’m hoping to get it taped up and ready to cut by the weekend. There’s a good three months of coat weather left here, so I I think I’ll sneak it in just in time. For my Australian friends, Spring in Kansas is generally colder than a Sydney Winter, with the odd bit of frost and occasional snow dustings.

After this, I’m planning on making the new dress pattern by Tessuti Fabrics. How lovely is the Claudia dress?! I was smitten the moment I saw this one. I’m hoping to find enough linen scraps in my stash. I have a feeling I may need to get a little creative though. What’s in your sewing queue? Are you still sewing for Winter (or Summer, my friends downunder)?

Swimmers swimsuit V1

If you follow me on Instagram, you may have seen that I’m on a mission of sorts. I’m determined to perfect a couple of swimsuit designs, both for myself and my daughters.

Swimming is slowly becoming a big part of our lives, so it makes perfect sense that my sewing table would reflect this. We’re at the pool most days. I’m like a yoyo, driving the kids to the pool in the afternoon, and then back again on my own as often as I can. After nearly a year of talking about it, I’ve finally joined the Masters and I LOVE it. Swimming in a squad is nothing like swimming on your own (I’ve been kidding myself for months). During each session my hypoxic lungs and burning arms body remind me just how out of swim-condition I am, but also, just how good it is for me.

I’m currently working on three styles of swimsuits. One is a kid-style. I don’t like seeing kids in swimsuits that are too skimpy through the bottom and sides (like my suit design in this post!), but I also don’t like the racerback to be too wide. Whilst I would still recommend Jalie 3134 for kid swimsuits (and at this point, I can’t actually think of a better sewing pattern out there for the specific purpose of squad swimming), it just wasn’t the perfect swimsuit pattern for this very picky swim-mum. I’ll still sew Jalie 3134 again, but I’ll probably reserve it for when I have smaller fabric scraps to use up. There’s some great panelling on that pattern.

In terms of the issues, I found the crotch of Jalie 3134 pattern a little too wide and the fit around the bum and lower back less than ideal. If you look at the woman’s back view picture on the pattern cover, you can see the gathering/wrinkles I’m talking about. It’s really no big deal, but I know a better fit is possible. I also don’t like the side seams on this pattern. I feel like you can get a better fit through the lower back/sides with a slanted side/hip seam that is positioned more towards the back of the suit, as opposed to a straight side seam connecting the front and back. A straight side seam also adds bulk to the underarm zone, which can cause pretty horrific chaffing if you don’t nail it during construction. But even then, you really don’t want an underarm seam in bathers if you are doing serious swimming. Again, I’m nitpicking here, but I’ve had a lot of hands-on, personal experience with swimsuits over the years.

The other two designs are just for myself. I’ve photographed the skimpier style for this post. I’m quite pleased with how it turned out but it’s still a little short in the body. I just need to add a little extra length/width to the upper bust area and then I think I can file this pattern away as done. I have another suit design on the cutting table that will provide a bit more coverage through the sides and back, with a back that looks more like the kid version.

Like the Jalie design I discussed earlier, my first two swimsuits (here and here) also had a straight side seam. Why? Because it’s easy to draft. Removing that straight side seam hurt my brain a lot, but it worked. Compare the seams in the photos below. The top (green cherry) suit is Jalie 3134. It has all the fun seaming. The bottom (buzzy bee) suit is my design. My accidental pattern-matching makes the seam a little hard to see in the buzzy bee suit, but you can see it better here.

I tried it out first on Miss nearly-Nine’s suit. Then I used the same principles to create similar designs for me.

I’m getting closer with the kid-suit. I messed up the neckline in this first draft, so I had to cut off the top binding and add pleats just to make it wearable (there’s no way I was going to waste a swimsuit with Summer on the way!). The fit through the back is pretty spot on though.

My next version also worked out really well. It was actually intended for my biggest girl, but we realised that Miss Seven needed it more. And since she’s chomping at the bit to join her big sister in the swim team, we all thought the buzzy bees should belong to her. Miss Seven is almost as tall as her big sister, but just a smidgin narrower through the waist and hips. I wasn’t able to catch her to photograph the swimsuit dry, but it was rigorously tested in the water yesterday. In fact, I was lucky to catch this one for a photo, full stop.