V9313 wrap dress in linen

This dress is already one of the favourite things I’ve ever made. I used a Vogue custom fit pattern, which has separate bodice pieces for different cup sizes. I used the A cup version. I cut a size 14 pattern as this corresponded most closely with my chest and waist measurements. Even so, I still made a few adjustments for cutting the fabric.

I added 5/8 inch to the shoulder seams on each side (as a wedge, as per my usual broad shoulders adjustment). I also added an extra half inch to the bodice length. I think I lengthened the sleeves too, but I can’t remember by how much. I also slashed and spread the sleeves by about an inch to widen them, and I cut them on the bias. Finally, I flattened the sleeve cap a little to reduce the ease. I wanted a very smooth armscye fit without much shape since I fit the bodice to sit the armscye right on the edge of my shoulders.

The pattern has great skirt options for this dress. However, I had my heart set on a gathered, midi length skirt. It’s basically just a big rectangle. As I often do, I start out by following the instructions and then get a little side-tracked with doing what I want to do. I began sewing this pattern in the same manner. The bodice is made up as per the instructons, with a fair bit of slip stitching! I lost interest in following the instructions after that so I really can’t comment on them anymore. I added a little hole in my waistband and lengthened the waistband straps so that I could wear the dress like a true wrap dress, with a tie at the back. I think the actual pattern calls for a button to secure the skirt at the front though.

The fabric is linen from The Fabric Store. I love it so much! The main stripes are a beautiful weight that really doesn’t need to be lined. The green micro striped linen is so soft and delicious that I want to make a hundred t-shirts out of it.

 

 

A Kobe Dress in Colette Dinnigan lace

My basement is currently in a bit of disarray. Unfortunately, that is where I usually sew… We’ve just had the concrete floor cut and pulled up to replace the old metal sewer pipes with brand, spanking new plastic ones. Yesterday, the concrete was poured. Today, we have a proper floor, but oh my, the dust!!! Soon, I’ll have to move everything so carpet can be put down. When the carpet is FINALLY down, I suspect I’ll take a bottle of champers to the basement to quietly celebrate in peace with my sewing equipment… for a whole weekend.

I’m currently waging a seemingly endless war against dust. But in the midst of my battles, I try to squeeze in a little sewing, even if it is only on Sundays right now. Summer break with the kiddos doesn’t help much. I don’t know why I always think I’ll find more time to sew over Summer. It never really happens.

In any case, last Sunday, I sloped off to our dusty basement (avoiding the big centre line ditch that still hadn’t been filled with concrete at that point. I slipped the drop sheets off my sewing tables and snuck in a little sewing. The outcome was a lovely lace, Kobe Dress. The pattern is one I’ve used before, by Papercut Patterns. The lace is Colette Dinnigan from Pitt Trading. The lace I used is sadly now sold out, but Pitt Trading has loads of other gorgeous laces that would do the job. My Colette lace came in panels. I used three for my version of this dress pattern, but I’m tall and I also lengthened the hem and sleeves quite a lot. I think most people could get away with using two panels to make the dress right out of the packet.

Sewing with lace isn’t that difficult. You just have to take your time. I’m by no means an expert, however, I am super happy with how this dress turned out.

To cut this lace, I knew I wanted to use the lace edge as a hem so I lined that up for the front and back. I used the entire panel length for the dress back pattern piece, and pretty much an entire panel for the front. But remember, I lengthened my dress (not sure how much by as I was most focussed on using the entire panel and lining up the hems). I’m also 5″10.  I used my third panel for the sleeves. Again, I wanted to use the lace edge to avoid hemming, so this used up most of one side of the panel. I have a little leftover lace, but no more useful lace edge left.

I finished the neckline with a narrow hem. I just took my time, basting down one fold, and then stitching slowly over the next fold. Using a walking foot helps with tension. It’s very important not to stretch the neck out as you sew, OR sew with the tension too tight. The rest of the seams in this dress are French seams. I think the fabric deserved that.

I’m wearing my Kobe dress over a black slip that is partly store-bought, and partly modified by me. It’s become one of my most important wardrobe accessories because I’m loving sheer dresses at the moment. I love this dress on it’s own, but the style also works well with a narrow belt. I’m also pleased that I spent the time on finishing it nicely with French seams. It’s a dress that I’ll probably hold on to forever.

Summer scrapbust dress in mustard linen

What do you do with all those lovely little lengths of fabric that are too small to sew even a pair of shorts, but too good to give to the kids? I usually just hold on to them and hope some inspiration comes. It often takes a very long time!

This time, I had an idea. I had several beautiful pieces of white, and mustard linen from The Fabric Store. It was leftover from these recent projects (here and here). I had my mind set on making a simple, Summer shift dress, but I wanted to test the design first. The dress pattern I used was little more than a loose sketch I made using several patterns I already own for guidance. It’s basically just two unfitted, T-shirt shaped, pattern pieces (front and back), plus some binding and cuffs for the sleeves. It’s an easy, slipover dress that will be great for throwing on over swimsuits or dressing on a hot day.

Before I could cut out any pattern pieces, I needed to create the fabric. I pieced together random lengths of linen to create a big, random design. I doubled up the white linen to give it the same density as the mustard linen (except in the shoulder area). It was fun creating the random design and quite interesting to see how they would work together in the end. Turns out that I quite like this little dress.

 

Kobe top in sheer silk

I’m a little obsessed with floaty, sheer fabrics right now. And in my world, that literally means all the silks. Liberty of London do an amazing crinkle silk which I’ve used before. I’m thinking about using it next time if I sew this pattern up as a dress. For this version, I used a divine silk georgette from The Fabric Store.

I only made a few small modifications to the pattern. I sewed up a size small which is quite close to my measurements. However, I know I have to adjust for my shoulders these days, even when the bust measurement matches perfectly.

The adjustment that works well for me is this. I draw a diagonal line from the middle of the shoulder seam to the CB of the bottom of the top (or very close to it). I slice along this line and spread the shoulder seam by about 5/8″. It generally keeps the waist the same size but adds width to top most shoulder area, which fits well with the triangular body shape that those of us with strong shoulders and lats have. I repeat with both sides, and the front and back of the top. If the top hangs well below waist level, or I am dealing with a dress, I cut the pattern off at the waist so as not to widen the waist or hip area.

My first attempt at the Kobe top turned out a little shorter in the front than I expected, even with just a narrow hem. I usually lengthen patterns in the bodice by 1/2 inch to account for my 5″10 frame. I didn’t in this case and I’m pleasantly surprised. It’s a little outside my comfort zone, but still like this top a LOT. I don’t mind the sliver of tummy. But I know this top would also pair perfectly with my high waisted jeans.

The back is sitting a little lower in the photos than I expected. I think I wear this top pushed back a little to raise the neckline. I’ve been wearing the top with a little cropped top/soft bra underneath in a complementary shade of apricot in real life to avoid the peek of bra underneath. I think it works.

 

 

An updated drop waist dress in printed linen

I made a bunch of drop waist dresses several years ago. I absolutely loved them. Two are still in very good condition. They just feel a bit outdated to me, so they have been packed away for another time (or for when my girls become teenagers and want to explore all the old clothes I used to make and wear).

I used the old pattern that I drafted for myself years ago. Sorry, there isn’t a pattern for this, but it is far from complicated. I used French darts and a slightly A-line shape to the dress bodice. I like French darts for this style as then blend in nicely with the A-line shape. The bodice has a hi-lo curve to it, and the gathered skirt is a little longer than I’ve used in the past. I also modified the shoulders to create ties instead of fixed seams.

The linen fabric is from The Fabric Store. It’s such a lovely, fresh print. And for those of you who like to wear linen, but have trouble with the delicious crinkles, I’d suggest you try a printed linen like this. It still wrinkles like linen, but the print kind of disguises them.

This will be such a cool and comfy dress to slip on during hot, summer days. I’ll probably wear it most over bathers, on trips to the pool, or outdoor swim meets.

Burdastyle paper bag waist shorts

These are my new favourite shorts. I need more of them. In linen. A pants version. A whole closet full would be nice.

The pattern is Burdastyle 111A shorts style. I made a few small modifications.

  • I omitted the front fly (might have been a faux fly…)
  • I also ommitted the belt carriers
  • I stitched down the facing and created an elastic casing as I did this. The shorts do not include an elastic waistband, but I wanted a pair of easy, comfy shorts that could be pulled on (as well as tied up with a big bow!).

I love my new shorts. The linen is from the Fabric Store; a most divine shade of Military Green. I love the exagerated paper bag waist of the design. I’ve been wearing them with a silk tank I made ages ago. The very pretty charmeuse is an oldie from Tessuti Fabrics. I can also see myself wearing these shorts with a billowy, white linen top in Fall.

 

BHL Orsola dress in mustard linen

I’m excited to finally get to share my Orsola dress. It’s By Hand London‘s latest pattern release.

The Orsola dress is a true wrap dress. I sewed mine up in a beautiful linen from The Fabric Store.

I made a few small modification to my Orsola dress. I graded between sizes, sewing one size larger through the bust and blending to a smaller size through the waist and hips. I lengthened the bodice by 1/2 inch and the hem by 4 inches.

The bodice in the dress pattern has bust darts and waist darts. I’m an A-cup bust on a good day so I removed the bust darts, just keeping the waist darts for shape. It worked perfectly.

After toiling the skirt, I also removed the front darts. My body is angular rather than curvy and I didn’t need the extra fullness through the hips that the front darts provided. I also skimmed a few mm off the upper hip curve, just to reflect my shape better.

The result is a super comfortable and elegant dress that I’ve been wearing a great deal. It fills the ‘smart casual’ gap in my wardrobe perfectly. If I had more linen in my stash, I’d be inclined to sew up another!

 

Itsy bitsy Heiress Bikini and rashie

 

Sharon, from Swimstyle Patterns, contacted me a few weeks ago to see if I’d like to try one of her patterns. I was under no obligation to blog about it, but I’m very impressed, so I want to share my experience.

I’d already discovered this Australian indie pattern maker a few months earlier via Instagram so I knew what patterns she had to offer. There were two main reasons why I hadn’t already purchased any patterns off her myself. It was mid-Winter here! Also, I don’t wear bikini’s very often. I’m not opposed to a good bikini. They just don’t suit my lifestyle (which involves real swimming, rather than sunbathing). And on the odd occasion that I might be lazing around a pool, I’m always in hiding from the sun, covered up from head to waist with a long sleeve rash vest, thus rendering a bikini pointless anyway.

There are lots of swimsuit patterns out there, including vintage, indie, and modern. I’ve sewn more than a few of each. However, it’s still hard to find style lines and sophisticated construction techniques that replicate RTW. I work in a high end clothing boutique once a week (and do the odd modelling job for them as you may have guessed from my IG feed!). On Saturdays, I spend my time studying, styling, and fitting designer clothes, mainly on customers (but sometimes on myself too ;-)). One such item I was admiring recently was a very cute bikini by Milly. I especially loved the seamless design and the simple, yet flattering shape of the separates. The Heiress bikini has a very similar seamless design, so I was quite keen to try it out.

I cut a size 10 for the bikini, which corresponds very closely to my measurements. The top portion is drafted for a B-cup. I’m an A-cup on a good day, but I wanted to trial the pattern first before I attempted any modifications.

The fabric I used is not your traditional swimsuit fabric. It’s actually a double layer of swimsuit fabric, bonded together. This makes it extra thick (a little scuba-like), extra flattering, but with a little less stretch. I think it makes the bikini top extra supportive, but perhaps the reduced stretch also makes the bottoms a little skimpier.

The bottoms are actually a perfect fit (albeit in a very cheeky style!). The seamless design makes for such a pretty finish. The top would be perfectly suited to a B-cup. I think (given the stretch of swimsuit fabric and style of cut) it would probably look great on a C-cup too. It’s a little “empty” on me and since I don’t need or want padding in my swimsuits, I’ll probably give it away.

I’m keeping the bottoms though. I have another top underway that I’ll pair with the rashie below (also by Swimstyle Patterns). Ideally, I would have made this up in the long sleeve version (sun safety all the way here!) but I just didn’t have quite enough fabric. I sized down in this pattern, and then adjusted the side seams further as I made it. Swimsuit fabric is stretchy and I like my rash vests to fit like a second skin. That way, you almost forget you are wearing one. I could probably still bring the seams in a smidgen around the waist and arms. I’m amazed at how many loose-fitting, oversized skinsuits and rash vests I see people wearing in real life, especially poor kids. They must feel so unpleasant and heavy when wet!

The other great thing about this bikini pattern, is that there is a free pattern hack for anyone wanting a bit of extra butt coverage. There are also more strap options for the top. I chose the halter version, but there is also an adjustable strap version, and a really neat cross back hack available.

 

Off the shoulder dress and tutorial

Every time I wear this dress (or this one), I always get a few compliments, and yet, it is possibly the simplest dress I’ve ever sewn. It is really nothing more than two rectangles and a bit of elastic casing.

osh1

 

I hesitate to call it a ‘tutorial’ because it really is so easy. Read the steps below to see why.

STEP 1. Cut two rectangles for the dress body.

 

off shoulder tute

 

STEP 2. Cut two smaller rectangles for the sleeves.

off shoulder tute2

 

If you want a fuller volume in the dress and sleeves, simply multiply the width by 2 instead of 1.5, or any other number in between.

To create the elastic casing, you can fold down the top of the dress and sleeves. I got a little bit fancy and added a contrast band as casing.

The sleeves are attached to the dress by matching the top side seam of the dress (at the casing) to the undersleeve seam and sewing through both securely to fix them in place.

IMG_0635

IMG_0634

This dress is a style of off the shoulder that I’ve seen in some high end RTW (despite the simplicity of the design!). It shows a little underarm cleavage but the elastic allows a good range of arm movement.

osh4

My dress was made using vintage cotton/silk voile, which I lined with a bit of cream silk habutai from my stash. It’s a very lightweight and cool dress that can easily be dressed up with a pair of funky heels. I wore it most recently to an evening function in sweltering KC. It was bliss.

desatos3

desatos5

I also want to mention the shoulder straps that you see in some of the photos as they quite obviously aren’t a part of this tutorial (you can find a bit more information about them here). Several months ago, I made my first off the shoulder dress (to a slightly different design). I wear it as an off the shoulder dress sometimes, but mostly I wear it with the same bra that you see in these photos. The bra is just stock standard in my closet, but I covered the straps in the same fabric as the dress so it looks like it is a part of the dress. I hate strapless bras, so the bra increases the wearability of the dress for me.

desatos1

 

Linen romper

So this wasn’t a complete fail, but I really don’t love it. I tried so hard to make it work, but still, all I’m feeling is meh…

plst8

It’s not a complete loss though. The linen was salvaged from old makes and small remnants that I had lying around. It was incredibly satisfying to clear my scrap pile of all the lovely linens (which are too beautiful to throw away, but too small to make anything worthwhile with). If you look closely, the front and back of the shorts are actually two different blues… this make was scrapbusting at it’s finest!

plst4

plst7

The colour-blocking was determined by the scraps I had on hand. The shorts are based on the Carolyn Pyjama pattern. I lengthened the crotch rise (front and back) by 1.5 inches in order to raise the waistline and make them suitable for a romper design.

The top half was designed by me. It’s very basic. I chickened out of the front-tie design I originally had planned. I liked the look better but the deep, deep neckline would have rendered it for beach-wear only. As it is, I may not love this make, but it will still be a practical wardrobe addition for Summer.

plst5