Halston knock-off trousers

I was lucky enough to do a bit of modelling a few months ago and I got to wear a pair of amazing Halston pants. They weren’t even in my correct size (there was a bit of back-clipping involved), but I still fell instantly in love with them. The light, drapey fabric screamed Spring, and I just loved the large overlapping pleat at the front. Needless to say, I examined them very closely and took a lot of photos.

There are a few sewing patterns out there that are reasonably close in style, but nothing that is actually the same. The Ebony pants by Style Arc have a similar feel, but are pull-on, elastic waist pants with a mid-rise. The Halston pants are high waisted, with a regular waistband and back darts, symmetrical pleats next to the front pockets, and a centre front invisible zipper hidden beneath a large front pleat. What may seem like small design differences can make the world of difference to how a final product feels and looks. I felt it would be simpler for me to start with a well fitted pair of trousers and adjust the design from there. It’s not hard to cut and slash a few pleats. That’s all the overlapping pleat is in the front. It’s just a pleat that begins at the CF, at the same position as the zipper.

My pants are far from perfect. This was a wearable muslin (so I’m not too worried about the waistband puckers). I used the most hideous, poly suiting from Joann. I almost wish I’d spent a bit more now since they worked out better than expected. I could stand to add a half inch to the crotch length to bring the pants a little higher to my true waist. I also need to straighten my side seams by adding to the back and taking from the front and vice versa. See how my outer leg seam curves around to the back.

I love the look of pink silk with grey. But in real life, I’m most comfortable pairing these pants with a white shirt and wool boob tube. It’s just a little hard to show off the neat front pleat of the pants in this way though!

 

 

Oliver + S // Faux leather pants

I’m not sure how long I’ve had this pink faux leather in my stash, but it was always destined for Miss Six. She’s such a groovy little chickadee.

1

4

3

 

I used the Parachute pants pattern from Oliver + S. I removed the side panel, narrowed the legs a little, and lengthened them to the next size up to better fit my tall girl.

The legs are obviously too long on Miss Six right now. I was planning on hemming them, but the faux leather looks cleaner unfinished, so the extra length comes from the hem allowance that was never turned up. We’ll probably leave it as it is for now and just roll the legs up until Miss Six’s legs stretch (which happens regularly anyway!).

5

 

 

Cropped black trousers

I’m sure there is a pattern out there for pants like these somewhere, but I couldn’t find one for the life of me. There were a few criteria I wanted to meet: hipster rise, side pockets, big front pleats, real fly front, semi-fitted and tapered legs, and back welt pockets. I skipped the back welt pockets on mine because this was just a test run. I also planned to crop them to the length  you see in the photos, but I cut them too long and I quite liked the rolled up look instead.

2

These pants are a very wearable muslin in inexpensive cotton sateen. I just wanted a pair of pants that would fit me so I used my trusty TNT crotch curve and drafted around that. The fit is quite good, but there’s something a little funny going on in the front. I suspect it’s because I spent so long stuffing around with the front fly and my zipper extends too low into the crotch curve. It could also be something to do with the pleats. Shortening the zipper should at least partially solve this for next time.

1

I also need to widen the pocket bags and shorten the pockets quite a bit. They are impractically narrow and too deep at the sides. I really like the rise though, and the waistband width. With hipster pants, you need a curved waistband rather than a straight one. I’ve always had the problem of significant back gaping in the waistband of RTW hipster pants/jeans and I think this comes from the waistband being straight, or too straight for my figure. It was a nice feeling to get a good fit in this spot.

1

A Grainline Archer and refashioned RTW trousers

This is my second Archer. My first Archer fit reasonably well, but this one fits a lot better. I made a few extra changes to better accommodate my broad shoulders. This consisted of lengthening the shoulder seams by 1/2 inch and spreading the back by 5/8 inch (without changing the neck width). However, next time I think I’ll shorten the shoulder seams back again by about 3-5mm on each side. The armscye sits a little wide in this version.

4

I might consider adding fish-eye darts to the back if I decide I want to change it to a more streamlined fit. Right now I’m happy with the relaxed look. This is probably how I’ll wear the shirt in Fall.

2

I most likely won’t be wearing it with the collar stand buttoned, but the fact that I can (and still move my arms) is nothing short of a miracle. Well, it would be if we were talking about RTW. Another great thing about sewing for yourself is the fact that you can position the buttons pretty much anywhere you want. I have no idea what the actual pattern recommends. I focus on the third button down and position that in relation to my body. The rest of the buttonholes are measured equally apart from there with this neat tool. The third button down is generally the top button I keep buttoned so I want it to be at a modest height but not too high either.

6

My favourite thing about the Archer is the collar. It has such a lovely shape. My least favourite thing about the design is the sleeve placket. A sleeve placket is very easy to change though. I used a very standard sleeve placket pattern piece, pilfered from my husband’s TNT shirt pattern, Simplicity 6138. I used white cotton as a contrast for the sleeve plackets, inside collar stand and yoke facing.

5

The grey wool trousers belong to a Herringbone Sydney suit that I’ve owned for ten years. The original shape was a long, boot cut. However, they’ve never quite been long enough on me and the boot cut style is now quite outdated.

10

Oh dear, look at the not-so-blind stitching on the left hem. I machine blind-stitched the hems and will have to re-do the left leg. I knew I’d left the tension too high on that leg but was hoping those puckers would iron out.

12

9

The following diagram helps to describe my modifications. I narrowed the side seams and re-hemmed the legs. I tried to keep a deep hem in case I want to lengthen them again in the future. The picture below shows the shape of my modified seamline (red).

pantsMy main concern with these pants was in getting the leg length and width correct, particularly towards the calf and ankle. I wanted them to be narrow and tapered but not too tight around my calf. I’m quite happy with the shape I achieved.

I have another pair of trousers planned, but next time I will sew them from scratch in black cotton sateen. I’m working on the pattern right now. It’s nearly drafted, but I want to mull over the pocket design first. I like to sleep on a design before I cut into the actual fabric. More often than not, I’ll wake up with the idea I couldn’t quite grasp the night before.