Some time ago, I was the recipient of several large remnants of lovely vintage fabric. Mostly, it was made up of silks, but there were a few synthetics in there too, including the pale green satin I used for these pants.
This satin (although very beautiful and silk-like) is a pretty tricky colour to pair with most of the skin types in my immediate family. Harper, Annecy and I have very fair skin and blue eyes. I have a very warm undertone to my skin which gives me the illusion of a looking tanned at times, but (for example) I use the palest shade of Lancome foundation available. This particular shade of green is probably one of the worst colours you could ever put on us. Miss Eight, with her coppery hair and green-tinted, blue eyes, could have pulled it off, but even so, I think there are more beautiful colours I could put her in when she gets old enough to wear a heavy satin like this.
It probably would have sat in my stash indefinitely had the thought of satin track pants not occured to me. And pants, being a considerable distance from my face, would not be as likely to drain me of all my human colour.
I used a Chado Ralph Rucci pattern (Vogue 1347) that I’ve used a few times before. I like the fit of the elastic waist pants, and the legs are drafted long and wide (even for me!). I made a few small modifications to the pattern.
- I changed the waistband construction, by stitching on a separate waistband casing, rather than simply folding down (albeit with some tidy bias facing). This *may* have dropped the waist height by about a half inch. I can’t quite remember. I also made my wasitband extra wide. I stitched a seam 1 cm from the folded edge of the waistband so it would “ruffle” slightly above the encased elastic.
- I omitted the pockets because I though they might be too visible/bulky under the satin. I regret this decision a bit now! I do love pockets.
- I added a black panel down the side of the leg. I seamed the back leg portion of the pants to include this panel.
- I added 1 inch to the length of the legs.
I took a while to decide whether I wanted to line these pants or not. In the end I chose to fully line them in a beige-coloured, acetate lining fabric. The lining will increase their comfort against my skin since acetate is breathable and poly satin is not. It also adds warmth (Winter!), smooths and strengthens the outer fabric.
These are fun pants that I will enjoy wearing during Winter as a change from jeans. I’ve paired them with the satin cami I made recently, because it was still very hot when I was taking photos. I’ll probably be wearing them differently in a few months, perhaps with a button down shirt and blazer, or a sweater and coat. I’m sure I’ll have more photos to share on Instagram soon.
Even though I sew a lot of clothes for my daughters, I’m not averse to shopping the Target clearance racks. I often find little gems there that I generally couldn’t make for the price on the tag (and this always takes a bit of pressure off my sewing to-do list).
The other day, I picked up a very simple, loose fitting top for Miss Six that Miss Eight immediately fell in love with also. My eight year old and six year old are very similar in size now and the top easily fit them both. All I had to do was rub off an exact copy for the older child.
The top is kind of a peasant style, but with little flutter sleeves and a front bodice with shoulder seams that swing around towards the back. The trickiest bit was navigating the angle of the shoulder seam and trying to determine the shape and depth of the armscye because in stretching out the elastic neckline to do so, I was also pulling the top out of shape. I came close to getting it right but I will have to angle the shoulder seam down more next time and raise the armscye. Otherwise, we’re all delighted with how the little top turned out.
I used my leftover vintage voile (from this dress). It’s very sheer, so she’ll wear a nude cami under the top. On the topic of kid undergarments, I bought her a few of these camisoles the other day (no affiliate link, I just think they are a great product). They are beautifully smooth and fitted, with little adjustable spaghetti straps; an exact, mini version of something I would wear. They are a more elegant option than the traditional singlet for an eight year old and I think this “grown up” appeal is why they may actually get worn. I bought them mainly to be worn as an extra layer during Winter. They’d be easy to sew, but y’all know how much I love sewing staples…
The shorts are a little version of my Cartwheel Shorts pattern that I made without the front pleats for a little less volume. I used my leftover vintage linen/lace tablecloth (seen also here). I think these shorts look adorable on her. If you follow me on IG, you may have seen the matching pair that I made for Miss Six too. She’s very proud of her artwork!
What do you do if you can’t decide if your top should have a sleeve or not? You make both versions of course!
I originally only had the sleeved version of this little one-shoulder top in mind, but that changed mid-construction. I left the sleeve off the first version, but since I’d already cut the sleeve, I decided to follow through with the sleeved version too.
The fabric is a vintage score from an estate sale. It’s some type of seersucker, but most likely a poly version, which means I’d already delegated it to the “wearable muslin/kid” section of my stash. I love having a few good lengths of stress-free fabrics like this in my stash. It takes the fear out of experimenting with new designs and styles, but still makes a fun, wearable item if I do end up liking it.
Now, let me talk about the design a little, because it is something you can easily replicate yourself. I used my Branson Top pattern as a base because I love the more fitted back and slightly dropped shoulders of that design. You could use any TNT top version that you already have on hand.
Here are the steps I took in making the modifications:
- Removed the CF seam and traced the front and back pieces in full. You won’t be able to cut any pieces on the fold because the pieces are all asymmetrical.
- I raised the front hemline to match the back (the front hem dips lower in the Branson top).
- I brought the neckline of one shoulder seam in towards the neck by 1.5 inches.
- Sliced diagonally across the pattern pieces to create the one-shoulder shape. I shaped this line with a very slight curve in my version but you could keep the line straight. The diagram below shows the back pattern pieces, but I kept the line the same for the front.
In the sleeveless version, I simply added some elastic in a strip of casing at waist level in the front of the top only (the waist is marked by the back seam above the peplum in the Branson top). The back of my top is fitted so it doesn’t need any elastic. I used pre-made bias tape for the casing.
I bound the neckline with pre-made bias binding, turned to the inside to function as elastic casing for thin elastic. The neckline only needs a lightweight/thin elastic to pull it in against the body, rather than hold it up.
For my sleeved version, I just shortened the sleeve and added elastic casing.
These tops were both super easy to make and will be a fun addition to my wardrobe for the last half of Summer.
Every time I wear this dress (or this one), I always get a few compliments, and yet, it is possibly the simplest dress I’ve ever sewn. It is really nothing more than two rectangles and a bit of elastic casing.
I hesitate to call it a ‘tutorial’ because it really is so easy. Read the steps below to see why.
STEP 1. Cut two rectangles for the dress body.
STEP 2. Cut two smaller rectangles for the sleeves.
If you want a fuller volume in the dress and sleeves, simply multiply the width by 2 instead of 1.5, or any other number in between.
To create the elastic casing, you can fold down the top of the dress and sleeves. I got a little bit fancy and added a contrast band as casing.
The sleeves are attached to the dress by matching the top side seam of the dress (at the casing) to the undersleeve seam and sewing through both securely to fix them in place.
This dress is a style of off the shoulder that I’ve seen in some high end RTW (despite the simplicity of the design!). It shows a little underarm cleavage but the elastic allows a good range of arm movement.
My dress was made using vintage cotton/silk voile, which I lined with a bit of cream silk habutai from my stash. It’s a very lightweight and cool dress that can easily be dressed up with a pair of funky heels. I wore it most recently to an evening function in sweltering KC. It was bliss.
I also want to mention the shoulder straps that you see in some of the photos as they quite obviously aren’t a part of this tutorial (you can find a bit more information about them here). Several months ago, I made my first off the shoulder dress (to a slightly different design). I wear it as an off the shoulder dress sometimes, but mostly I wear it with the same bra that you see in these photos. The bra is just stock standard in my closet, but I covered the straps in the same fabric as the dress so it looks like it is a part of the dress. I hate strapless bras, so the bra increases the wearability of the dress for me.
I made this little dress way back in April for my daughter’s birthday. She specifically requested it. We’d just been through the seasonal wardrobe shuffle which meant that a lot of her dresses were passed onto her younger sister, including this favourite that I made for her last year.
The pattern is the Twirl to Me dress, in the maxi length. The fabric is vintage, found at an estate sale for less than a few dollars. It is a beautiful cotton sateen, but quite an old fashioned print. I was surprised that Coco picked this from my stash, but it ended up suiting the dress very nicely.
I know she’ll get a lot of twirls out of this little party dress. It’s obviously not quite as practical as a simple T and shorts, or the tunic dresses I make for her day to day wear, but it is a dress that makes her feel special when she wears it. And everybody needs something like that in their closet.
And in my best attempt at boring the beautifully knitted socks off y’all… here is yet another cold shoulder dress. I’d call it my favourite, but I’m still so desperately in love with this one.
I know very well that this style is trend-driven and it doesn’t suit everybody’s aesthetics. There’s heaps of ease through the body to make this dress so glorious to wear on hot days. The easy fitting, slipover design imparts a sense of freedom to the wearer. If you like your dresses fitted, this one just isn’t for you.
I made this version of the Chloe dress up in what I think is rayon. I found the fabric at an estate sale a while back. The burn test indicated a natural fibre, but the lovely, drapey hand of the fabric screams rayon to me. The rayon provides the beautiful drape that this dress deserves.
I’ve made the same pattern up in a crisp linen and a (poly) organza. I really, really like those versions, but I don’t love them quite as much as I do the dresses. In fact, I’m not the only one who loves my dresses. My daughters have been begging for their own mini-versions. I was lucky enough to have a bit of extra sewing time (and scrap fabric) so I whipped together a little scrappy version for Miss Eight. This dress (both the big and mini version) is a super quick sew.
But OMG the mini version is just the cutest! I put a sneak peek on Instagram and I’ll probably get some more photos up there soon. It looks totally gorgeous on Coco so it looks like I’ll be turning this one into a PDF pattern too. I’ve made too many promises. I need to grade the mini-design down to two more different sizes for her sisters now, so I might as well do it properly and add a few bigger sizes as well!
So I made a scarf, but now what do I do with it? I don’t usually wear scarfs, but I’m quite enamoured with the sweet nautical print of this little silk remnant.
The fabric came from an estate sale, in one of the fabric bundles I’ve talked about before.
There’s not much else to talk about when it comes to scarfs. I stitched a hand rolled hem. It’s my hands down, favourite type of hand-stitching. There’s something magical about the way the stitches disappear as you pull the thread to reveal a perfect, invisible hem. I shared a brief video on Snapchat (username: lilysageandco) when I was making the scarf. There’s already a million and one tutorials on hand-rolled hems out there so I won’t be re-inventing the wheel here. I found this one very clear (but save a few minutes of your life and fast-forward to the 3 minute mark before you start watching).
I paired my new scarf with a bit of white on white for the photos. I get a surprising amount of wear out of my bamboo jersey, off the shoulder top. The white jeans are Citizens of Humanity (thrifted and modified from a boot-cut style) and diy distressed with a cheesegrater and razor.
I’m calling this authentic because the thread and the fabric were both picked up at an estate sale. It’s plausible that the fabric is from the 70’s. It certainly looks the part.
To be perfectly honest, most of the fabric I find at estate sales is truly awful. There’s lots of old, rough quilting remnants, ugly home deco cottons, and dusty poly knits. The pricing is often absurd too, clearly valued by people who know nothing about fabric and sewing. I walk past a lot of rubbish. However, every now and then I find a gem and a bargain.
This fabric was a part of several bundles that I found at one particular house several months ago. Each bundle was $1-3 and contained 3-5 remnants of varying lengths. I was immediately apparent to me that some of the fabric was of high quality, but sometimes it’s hard to tell the exact fibre content of a fabric without a burn test, particularly with “nicer” synthetics. So I nabbed three of the more appealing bundles and took them home to inspect more closely.
Subsequent burn tests revealed a LOT of silk in that bundle, including this absolute gem. Needless to say, I popped back to the sale later that day and grabbed the remaining decent bundles. I ended up with several long lengths of pretty silks, two really long lengths of Liberty of London (one was a wool blend), and a few nice poly and cotton florals. Some prints are old fashioned, but even so, are still delightful for the right project.
I was able to determine that this particular floral fabric was a synthetic. It doesn’t press. It definitely melts (please don’t ask me about this!)! It’s stiffer than a silk chiffon. It’s not my kind of fabric at all, but I LOVED the 70’s vibe of the print. It was going to make the perfect partner for my suede mini and flares.
I wasn’t planning to spend much time or effort on a horrid poly like this but I didn’t have a lot of choice. I needed to bind the raw edges somehow. Self-fabric binding would have been beautiful (but an awful job with a fabric that won’t hold a crease). My solution was to use some sheer pink, silk organza that I already had on hand. Obviously, silk organza presses well but I’ve never used it for bias binding before. It’s a very crisp fabric to begin with but after several washes, silk organza turns super soft. It was the perfect compliment to this sheer blouse.
Remember the last wrap skirt I made? Well, not long after I made it, I spotted this Tibi skirt on Instagram. And as fortune would have it, I had just the right amount of (Perfection fused) leather leftover in my stash. I’m not exactly sure how this leather is made. It looks convincing but it definitely doesn’t compare to genuine lambskin. It is very affordable and easy to sew. The underside is fabric and the outer is leather. I find it doesn’t press/glue quite as neatly as the real stuff, but it is lightweight, quite fluid, and without flaws, which makes sewing with it very economical.
I used the same basic pattern as my last wrap skirt. It is a very simple modification on a pencil skirt (details here). However, this time I created a facing instead of a waistband and added a strap to wrap around my waist and tie secure at a silver ring. I didn’t line this skirt because the fabric backed leather didn’t require it.
This is a fun skirt. I’ll enjoy wearing it before the weather gets too cold. And later, I might have a go at layering it with jeans or skinny pants.
So, I loved Miss Seven’s vintage sheet shirt so much that I just had to make my own. Here it is.
My Grainline Archer has been modified to accommodate my standard broad back/long arm/height requirements. I also added a classic, tailored sleeve placket, and two fish eye darts in the back.