My second Fall project for 2018 is this linen dress. I love the oversized style of it!
I used Vogue pattern 9186 and a beautiful medium weight linen (Hampton Stripe) from Pitt Trading Fabrics in Australia (obviously they ship internationally ;-)). The fabric is truly beautiful. I think they may have sold out of this now, but I imagine it would have made a great pair of trousers or a blazer too. No lining required.
I altered this pattern a little. I did my usual broad shoulder adjustment at the shoulder seams. I took a photo this time too!
I also lengthened the hem by about 14 inches. This turned out to be a little too much on one side because of the asymmetrical nature of the dress. I ended up chopping off a corner and piecing the hem a little to create a more even hem, whilst still maintaining a good length.
I really LOVE the sleeves and placket and the fit and shape of the dress. I’m not so sure about the elastic casing at the waist. I loved the dress without, but there is excess fabric on one side of the dress to allow for the ruching. I sewed the elastic casing in and then unpicked most of it because I didn’t like the look. I don’t mind keeping just a little section on one side. I will sew this pattern again, but I’ll probably cut the front and back on the fold and ditch the elastic casing and extra fabric on the other side.
I love (and wear!) my last linen shift so much that I knew I needed another. My love for this dress is so strong that I don’t even flinch at the thought that I’m going to have to iron it if I wear it. Trust me, this can be a big deciding factor in my outfit choice for the day.
For this dress, I did a little bit of a scrapbust, using leftover linen from these earlier makes (here and here). Like my last version, this was also a pretty heavily modified version of the Lou Box Top from Sew DIY. My version is sized down several inches through the body. The armscye are dropped at least three inches. I also narrowed the neck a smidge. For the sleeves, I added a little ruffle.
The most interesting thing to note from this make is about the lovely linen. I used a classic light weight linen called Duck Egg and a block printed linen. Both are from The Fabric Store. I think the blue is always kept in stock but the printed linen is disappearing fast. I used exactly the same blue linen to make this dress, but found the blue to be too sheer, which is why I layered the skirt. I planned to do the same for this shift but realised I didn’t actually need to. Obviously the weight of the linen hasn’t magically changed over time. The difference was the fabric I was pairing it with and the fit of the dress. The very opaque knit of the blue dress made the skirt look too lightweight and the style was also a lot more fitted. When I paired the same blue linen with a similar printed linen, the eye was no longer drawn to the lighter fabric on the bottom. The looser style also disguises any possible silhouette, should I decide to stand with my back to a window at midday.
I will wear this dress a lot. It’s very versatile in the sense that I’ll throw it on over a swimsuit to wear to the pool, and the next week I’ll dress it up with some cool shoes for work.
This dress is already one of the favourite things I’ve ever made. I used a Vogue custom fit pattern, which has separate bodice pieces for different cup sizes. I used the A cup version. I cut a size 14 pattern as this corresponded most closely with my chest and waist measurements. Even so, I still made a few adjustments for cutting the fabric.
I added 5/8 inch to the shoulder seams on each side (as a wedge, as per my usual broad shoulders adjustment). I also added an extra half inch to the bodice length. I think I lengthened the sleeves too, but I can’t remember by how much. I also slashed and spread the sleeves by about an inch to widen them, and I cut them on the bias. Finally, I flattened the sleeve cap a little to reduce the ease. I wanted a very smooth armscye fit without much shape since I fit the bodice to sit the armscye right on the edge of my shoulders.
The pattern has great skirt options for this dress. However, I had my heart set on a gathered, midi length skirt. It’s basically just a big rectangle. As I often do, I start out by following the instructions and then get a little side-tracked with doing what I want to do. I began sewing this pattern in the same manner. The bodice is made up as per the instructons, with a fair bit of slip stitching! I lost interest in following the instructions after that so I really can’t comment on them anymore. I added a little hole in my waistband and lengthened the waistband straps so that I could wear the dress like a true wrap dress, with a tie at the back. I think the actual pattern calls for a button to secure the skirt at the front though.
My basement is currently in a bit of disarray. Unfortunately, that is where I usually sew… We’ve just had the concrete floor cut and pulled up to replace the old metal sewer pipes with brand, spanking new plastic ones. Yesterday, the concrete was poured. Today, we have a proper floor, but oh my, the dust!!! Soon, I’ll have to move everything so carpet can be put down. When the carpet is FINALLY down, I suspect I’ll take a bottle of champers to the basement to quietly celebrate in peace with my sewing equipment… for a whole weekend.
I’m currently waging a seemingly endless war against dust. But in the midst of my battles, I try to squeeze in a little sewing, even if it is only on Sundays right now. Summer break with the kiddos doesn’t help much. I don’t know why I always think I’ll find more time to sew over Summer. It never really happens.
In any case, last Sunday, I sloped off to our dusty basement (avoiding the big centre line ditch that still hadn’t been filled with concrete at that point. I slipped the drop sheets off my sewing tables and snuck in a little sewing. The outcome was a lovely lace, Kobe Dress. The pattern is one I’ve used before, by Papercut Patterns. The lace is Colette Dinnigan from Pitt Trading. The lace I used is sadly now sold out, but Pitt Trading has loads of other gorgeous laces that would do the job. My Colette lace came in panels. I used three for my version of this dress pattern, but I’m tall and I also lengthened the hem and sleeves quite a lot. I think most people could get away with using two panels to make the dress right out of the packet.
Sewing with lace isn’t that difficult. You just have to take your time. I’m by no means an expert, however, I am super happy with how this dress turned out.
To cut this lace, I knew I wanted to use the lace edge as a hem so I lined that up for the front and back. I used the entire panel length for the dress back pattern piece, and pretty much an entire panel for the front. But remember, I lengthened my dress (not sure how much by as I was most focussed on using the entire panel and lining up the hems). I’m also 5″10. I used my third panel for the sleeves. Again, I wanted to use the lace edge to avoid hemming, so this used up most of one side of the panel. I have a little leftover lace, but no more useful lace edge left.
I finished the neckline with a narrow hem. I just took my time, basting down one fold, and then stitching slowly over the next fold. Using a walking foot helps with tension. It’s very important not to stretch the neck out as you sew, OR sew with the tension too tight. The rest of the seams in this dress are French seams. I think the fabric deserved that.
I’m wearing my Kobe dress over a black slip that is partly store-bought, and partly modified by me. It’s become one of my most important wardrobe accessories because I’m loving sheer dresses at the moment. I love this dress on it’s own, but the style also works well with a narrow belt. I’m also pleased that I spent the time on finishing it nicely with French seams. It’s a dress that I’ll probably hold on to forever.
What do you do with all those lovely little lengths of fabric that are too small to sew even a pair of shorts, but too good to give to the kids? I usually just hold on to them and hope some inspiration comes. It often takes a very long time!
This time, I had an idea. I had several beautiful pieces of white, and mustard linen from The Fabric Store. It was leftover from these recent projects (here and here). I had my mind set on making a simple, Summer shift dress, but I wanted to test the design first. The dress pattern I used was little more than a loose sketch I made using several patterns I already own for guidance. It’s basically just two unfitted, T-shirt shaped, pattern pieces (front and back), plus some binding and cuffs for the sleeves. It’s an easy, slipover dress that will be great for throwing on over swimsuits or dressing on a hot day.
Before I could cut out any pattern pieces, I needed to create the fabric. I pieced together random lengths of linen to create a big, random design. I doubled up the white linen to give it the same density as the mustard linen (except in the shoulder area). It was fun creating the random design and quite interesting to see how they would work together in the end. Turns out that I quite like this little dress.
When you find the perfect silk, you really just have to make the perfect dress. I actually had another dress in mind for this silk, but when it arrived on my doorstep, I realised that it deserved something a little better.
It’s a silk satin by Trina Turk from The Fabric Store. It has a lovely, subtle texture to the good side, and the fabric is a beautiful weight that doesn’t require lining. It’s the perfect silk for a bias cut dress!
I used a design I copied from a RTW dress a few years ago. However, I lined the front and back bodice and turned it into a halter neck instead.
I love this dress A LOT. And I should. It’s the perfect fit. I guess that’s why so many of us sew though, isn’t it. How amazing does it feel to slip on a dress that fits like a glove, custom-made to your unique shape only?
I made a bunch of drop waist dresses several years ago. I absolutely loved them. Two are still in very good condition. They just feel a bit outdated to me, so they have been packed away for another time (or for when my girls become teenagers and want to explore all the old clothes I used to make and wear).
I used the old pattern that I drafted for myself years ago. Sorry, there isn’t a pattern for this, but it is far from complicated. I used French darts and a slightly A-line shape to the dress bodice. I like French darts for this style as then blend in nicely with the A-line shape. The bodice has a hi-lo curve to it, and the gathered skirt is a little longer than I’ve used in the past. I also modified the shoulders to create ties instead of fixed seams.
The linen fabric is from The Fabric Store. It’s such a lovely, fresh print. And for those of you who like to wear linen, but have trouble with the delicious crinkles, I’d suggest you try a printed linen like this. It still wrinkles like linen, but the print kind of disguises them.
This will be such a cool and comfy dress to slip on during hot, summer days. I’ll probably wear it most over bathers, on trips to the pool, or outdoor swim meets.