As soon as I saw this amazing fabric, I just knew I had to have it. It is a silk/cotton satin from The Fabric Store. The colours are bold, beautiful, and totally amazing. It handles a lot like a quilting cotton, with a similar, crisp hand, but with a beautiful, satin, surface sheen.
Obviously, I made a dress. However, I think it would also make a divine blazer or skirt. My dress is a self-drafted iteration of this one and this one. Over the years, I’ve managed to tweak a princess bodice design into a fit that is perfect for me. It’s easy enough for me to switch that base design up with different straps and skirts. I probably revisit that same pattern once or twice a year.
When I ordered this fabric online, I had two dress styles in mind. I just needed to get my hot little hands on the fabric first, to see which design would suit the drape of the fabric better. I also planned on making a turtleneck to wear under the dress in Winter. You’ve seen my turtleneck already. Funny how that shade of Ballet Pink perfectly complements this dress!
I love this dress a lot. The length is great. The pockets are fab. And the fabric is out of this world. It makes me smile every time I see it. I can’t wait to wear it layered in Winter, and on it’s own in Summer.
As I know I’ve mentioned in the past, one of my biggest fitting issues is my broad “swimmer’s” shoulders. I usually just lengthen the shoulder seams by slashing a wedge between the shoulder and the armscye. Sometimes I move the wedge medially to broaden the back a bit too. I use a little bit of intuition when I see the flat pattern in front of me. Over time, it’s easier to look at pattern shapes and have a bit of an idea what should be done to fit your body better. It’s much the same way that I can look at a pair of RTW jeans and tell you straight away if they will fit my shape or not. It’s just experience.
I made a slightly modified version of the Fall Turtleneck a few weeks ago and loved it. I was keen to sew it again, but I knew I would need to modify those shoulders a smidgen more. I also knew that I’d been wearing my husband’s old Strathcona’s to bed for a few years and it was a fit I could see potential in if I sized down. I tested this theory with my last make.
I basically just merged those two patterns together by laying them over each other and taking the bits that would fit my body the best. It worked out great. The wider “male” shoulder design suits me to a tee. But I also got to keep the body shape and cool turtleneck from the Papercut design.
If you follow me on IG, you’ve already seen how I intend to wear this particular turtleneck. If not, you will soon!
You should all know by know that I’m not super fond of sewing practical pieces. I’d much rather go buy things like leggings, pyjamas, activewear, tees, and the likes. I just don’t find it that much fun to sew staples.
A few months ago I happened across this gorgeous cotton knit from The Fabric Store. I thought the dotty print was pretty cute so I ordered myself some and made a fun little top. But I knew as soon as I felt it, that I’d much rather be covered head to toe in it as sleepwear. I put those pyjama plans off a little though, because…staples sewing.
I’m very glad I got around to it. I LOVE my new pyjamas. The fabric is a very stable cotton knit, and it actually feels a lot like flannelette after a few washings. It is so soft, thick, and cozy.
I used an old Vogue pattern for the pants. I’ve made up the wide leg pants of V1347 several times in the past for pyjamas, albeit in linen. They worked very well in a stable knit.
The top was a Thread TheoryStrathcona Henley. I’ve been wearing my husband’s old Strathcona’s as pyjama tops for a few years now, so I really wanted to see how the top would work sized down once for me. It turns out that the Strathcona Henley is a dream design for strong women with broad shoulders and small busts. It fits perfectly without any shoulder alterations. I omitted the front placket for some simple binding. I feel like I also may have lengthened the arms or cuffs in the past, but it’s been so long that I can’t remember.
Anyways, we just had the first real snow/blizzard in Kansas City for the past four years. Five or six inches of snow and the whole city stops. I’ve enjoyed the snow day with my girls, but now I’m off to snuggle up in my new PJ’s!
This a wardrobe staple. Everybody needs a floor length, leopard print skirt, right?!
The fabric is a luxe, cotton jacquard from The Fabric Store. I say luxe, because the print is so beautiful. The fabric though, is actually perfect for daywear. It is a lovely, heavyweight cotton blend that is easy to wash and care for. It does fray a little though, so I’d recommend serging the edges before prewashing. Otherwise, it was a dream to work with.
I decided on a skirt, but I think this fabric would also be amazing made up into a blazer or jacket. And if you are looking for something similar but for a more formal occasion, you need to check out this animal print jacquard!
I didn’t use a pattern to make this skirt. It was freestyle sewing all the way. The design is pretty simple. The top edge is turned over in a very deep “hem” which rises above the natural waist to create that high-waisted, “paper-bag” waist look. There is only one seam at the back of the dress, an invisible zipper which extends all the way to the top. It is basically one big rectangle (aside from the slight hi-lo shape at the bottom hem, which I cut away at the end).
I finished the top of the skirt and sewed the zipper in first. Then I pinned it to my body to create the perfect sized pleats at the waist. There are two big pleats at the front and two at the back. It was a very back to front way of sewing a skirt but it worked out perfectly! It fits perfectly with, or without a belt. However, I prefer the look of the skirt with a little skinny belt worn at the waist.
A short while ago, I made a long, linen dress using V9186. I love it a lot. I especially like the shape of the sleeves and collar. I like it so much that I decided to have a go turning it into a little top.
I had to modify the pattern a bit. The original pattern is asymmetrical in design so the pattern pieces are all cut flat. I simply traced one side of the pattern front and back and used those pieces to cut on the fold. I cut it to a top length and left everything else pretty much the same. The top is slightly flared and there’s plenty of ease so no bust darts were required.
It’s a very simple, cotton top. The fabric is a Mini Big Cat printed cotton from The Fabric Store. It’s a lovely lightweight cotton and easy to work with. I’ve got a little extra left over which I hope to make into a Summer frock for Miss Eight. I’m just hesitant to cut into it quite yet, given Miss Eight’s tendency to grow like a weed. I can’t find my particular print on their site anymore, but I think this option would also make a super cute top.
I like this top with jeans. It’s a simple, fresh look that I love. However, I have bigger plans for the top and you will be updated soon (unless you follow me on IG of course!).
For this version, I used a beautiful, striped merino jersey from The Fabric Store. It looks like my stripes might be sold out but there are other options that are equally as beautiful. It’s a lovely weight fabric for layering, or for wearing alone in Fall. I love merino jersey because it is soft and comfy to wear. It’s warm! And very importantly, it launders well.
With a few exceptions (coating fabrics, dry clean only plans), I wash all my fabric hard (on hot) and put them in the dryer (on hot) before sewing with them. I do this to make sure there’s no chance of future shrinkage or change when my finished garments accidentally get thrown in the dryer in the future. I’ll usually still try to gently wash my “nice” finished garments, but I know at some point they’ll all end up in the dryer, accidentally or not. I’ve learnt from experience that life gets in the way of garment care in my house. I’ve also found that if I choose quality fabrics, they are usually tougher than you imagine. I sew day-to-day clothes using plenty of silk, linen, wool, and cotton. I haven’t (nor have my washing helpers) destroyed a single fabric yet!
But back to this great cardi. I made very few modifications. I lengthened it by a few inches (3-4 inches for the hem and 1-2 inches for the sleeves). I also cut the back piece as one, and widened the shoulder seams to accommodate my swimmer shoulders. My binding is a little wider than the pattern suggests. I just went with the width that I thought would look better for this striped pattern.
I know I will get a lot of wear out of this great cardi. Merino knit is probably one of my favourite fabrics to wear in Winter and Fall.
Everybody needs a silver dress, right? I’m not actually sure what inspired me to sew this dress. It all started with an amazing silver “Tiara” knit that I found online at Pitt Trading. The fabric is so fabulous that the dress design only needed to be simple.
I used the Poppy Dress pattern by By Hand London as a base for this dress design. I widened the neck and lowered it a bit at the back. I know the pattern has long sleeves but I didn’t have those pieces printed out. So I extended the short version myself, to create a nice, long, slim-fitting sleeve. I also increased the back darts to shape the dress more closely to my measurements.
The fabric has a great stripe on the underside of the silver right side. I utilized this stripe by folding up the hem on the bottom and sleeve edge. I hate wasting a good double-sided fabric.
This is such a fun dress. It will be the perfect holiday dress in a couple of months.
This dress is already one of the favourite things I’ve ever made. I used a Vogue custom fit pattern, which has separate bodice pieces for different cup sizes. I used the A cup version. I cut a size 14 pattern as this corresponded most closely with my chest and waist measurements. Even so, I still made a few adjustments for cutting the fabric.
I added 5/8 inch to the shoulder seams on each side (as a wedge, as per my usual broad shoulders adjustment). I also added an extra half inch to the bodice length. I think I lengthened the sleeves too, but I can’t remember by how much. I also slashed and spread the sleeves by about an inch to widen them, and I cut them on the bias. Finally, I flattened the sleeve cap a little to reduce the ease. I wanted a very smooth armscye fit without much shape since I fit the bodice to sit the armscye right on the edge of my shoulders.
The pattern has great skirt options for this dress. However, I had my heart set on a gathered, midi length skirt. It’s basically just a big rectangle. As I often do, I start out by following the instructions and then get a little side-tracked with doing what I want to do. I began sewing this pattern in the same manner. The bodice is made up as per the instructons, with a fair bit of slip stitching! I lost interest in following the instructions after that so I really can’t comment on them anymore. I added a little hole in my waistband and lengthened the waistband straps so that I could wear the dress like a true wrap dress, with a tie at the back. I think the actual pattern calls for a button to secure the skirt at the front though.
My basement is currently in a bit of disarray. Unfortunately, that is where I usually sew… We’ve just had the concrete floor cut and pulled up to replace the old metal sewer pipes with brand, spanking new plastic ones. Yesterday, the concrete was poured. Today, we have a proper floor, but oh my, the dust!!! Soon, I’ll have to move everything so carpet can be put down. When the carpet is FINALLY down, I suspect I’ll take a bottle of champers to the basement to quietly celebrate in peace with my sewing equipment… for a whole weekend.
I’m currently waging a seemingly endless war against dust. But in the midst of my battles, I try to squeeze in a little sewing, even if it is only on Sundays right now. Summer break with the kiddos doesn’t help much. I don’t know why I always think I’ll find more time to sew over Summer. It never really happens.
In any case, last Sunday, I sloped off to our dusty basement (avoiding the big centre line ditch that still hadn’t been filled with concrete at that point. I slipped the drop sheets off my sewing tables and snuck in a little sewing. The outcome was a lovely lace, Kobe Dress. The pattern is one I’ve used before, by Papercut Patterns. The lace is Colette Dinnigan from Pitt Trading. The lace I used is sadly now sold out, but Pitt Trading has loads of other gorgeous laces that would do the job. My Colette lace came in panels. I used three for my version of this dress pattern, but I’m tall and I also lengthened the hem and sleeves quite a lot. I think most people could get away with using two panels to make the dress right out of the packet.
Sewing with lace isn’t that difficult. You just have to take your time. I’m by no means an expert, however, I am super happy with how this dress turned out.
To cut this lace, I knew I wanted to use the lace edge as a hem so I lined that up for the front and back. I used the entire panel length for the dress back pattern piece, and pretty much an entire panel for the front. But remember, I lengthened my dress (not sure how much by as I was most focussed on using the entire panel and lining up the hems). I’m also 5″10. I used my third panel for the sleeves. Again, I wanted to use the lace edge to avoid hemming, so this used up most of one side of the panel. I have a little leftover lace, but no more useful lace edge left.
I finished the neckline with a narrow hem. I just took my time, basting down one fold, and then stitching slowly over the next fold. Using a walking foot helps with tension. It’s very important not to stretch the neck out as you sew, OR sew with the tension too tight. The rest of the seams in this dress are French seams. I think the fabric deserved that.
I’m wearing my Kobe dress over a black slip that is partly store-bought, and partly modified by me. It’s become one of my most important wardrobe accessories because I’m loving sheer dresses at the moment. I love this dress on it’s own, but the style also works well with a narrow belt. I’m also pleased that I spent the time on finishing it nicely with French seams. It’s a dress that I’ll probably hold on to forever.
What do you do with all those lovely little lengths of fabric that are too small to sew even a pair of shorts, but too good to give to the kids? I usually just hold on to them and hope some inspiration comes. It often takes a very long time!
This time, I had an idea. I had several beautiful pieces of white, and mustard linen from The Fabric Store. It was leftover from these recent projects (here and here). I had my mind set on making a simple, Summer shift dress, but I wanted to test the design first. The dress pattern I used was little more than a loose sketch I made using several patterns I already own for guidance. It’s basically just two unfitted, T-shirt shaped, pattern pieces (front and back), plus some binding and cuffs for the sleeves. It’s an easy, slipover dress that will be great for throwing on over swimsuits or dressing on a hot day.
Before I could cut out any pattern pieces, I needed to create the fabric. I pieced together random lengths of linen to create a big, random design. I doubled up the white linen to give it the same density as the mustard linen (except in the shoulder area). It was fun creating the random design and quite interesting to see how they would work together in the end. Turns out that I quite like this little dress.