Tag Archives: Mood fabrics

BHL Alix dress – pattern tested

I recently did a bit of pattern testing for By Hand London. You might have seen a few sneak peeks of their new design on Instagram. I’m happy to say that it is finally available.

The Alix dress is a very flattering, easy-to-wear, slipover dress, with the perfect smidgen of 70’s vibe. I made mine up in a very cool striped and spotted silk crepe de chine.

The particular version you see here was made up according to the test instructions, so there has been at least one small modification to the final version. My dress has under bust pleats which can be a bit pointy. I think the final version gives the option of gathers which will produce a much smoother result.

I should also list the other small fit modifications I made. Like many people, I’m not a standard size, so I graded from a US 8 (bust) to a US 6 (waist and hips). I lengthened the sleeves by 1 inch (long arms). I also found the underarms a bit tight initially, so I let out the underarm seams out by about 1/2 inch in total post construction. This is not a reflection on the design, just simply a post-construction fit for my broad shoulders. I would normally slash and spread either the CB or shoulder seams (design dependent) by about 5/8 inch in total to adjust for my broad back/shoulders. A US 8 (35 inch bust) is the perfect bust/chest fit for me but my shoulders expand above my bust so I need to accomodate for this increase in back width without adding volume to the chest area.

My only other change was to shorten the maxi length version by 4-6 inches, shaping the hem in a slight hi-low fashion. I basically just made myself a midi. Cutting lines for all the dress lengths are included on the maxi length version so it is very easy to cut whatever length you desire.

I love my new dress and I’ll be holding on to this pattern for future versions too. It would make a lovely Winter dress in a lightweight wool. But actually, my brain is already working overtime, thinking how I might possibly be able to modify this pattern to make a sleeveless version next Spring.

alix10

White Esthers and a knit raglan

There’s never any fabric waste in my house, especially when it’s something as lovely as this Saratoga knit by O! Jolly!. I only had the tiniest amount left after finishing my Megan longline cardigan, but I knew exactly what I wanted to do with it.

whitetop8

I used the raglan view of V8952 as a base for the top. I made a few fit modifications, raised the neckline, and added my own neck and hem bands. I used some plain white ponte for the back and sleeves, and seamed together three scraps of Saratoga knit for the front. I love the texture of the spongy knit as a feature and the contrast of cream against white.

whitetop5

whitetop4

whitetop7

The shorts are an old favourite and TNT for me. I used the Esther shorts pattern and simply added an asymmetrical overlay at the front. I used scraps for this make too. I salvaged some gorgeous, meaty Theory cotton sateen (from this dress) to use for the back of the shorts and for the front overlay. The dress was tired (with a few stains) and needed to be retired. I didn’t have quite enough sateen though, so I used some scrap linen for the shorts front and overlay lining. The linen was too lightweight for the shorts on its own, but perfect for this design where the front is layered.

whitetop3

I’ll wear these shorts a lot. I made a yellow version a few  years ago which are still on the go, but have been downgraded to gardening/painting gear. It feels good to replace a wardrobe item that was very much loved.

 

Wool jersey luxe lounge pants // V8909

These pants are such a simple design and are so easy to make that they very nearly didn’t warrant a blog post. I’ve use the pattern several times before and have tweaked it slightly along the way to improve the fit. This time round, I lengthened the legs, and only sewed two channels of elastic in the waistband.

1

The only point of interest in these pants is to do with the fabric I used to make them. It is a wool/acrylic blend in a super soft, loose knit jersey. It’s the same fabric I used to make this grey knit dress. It’s not the type of fabric I’d normally associate a pair of trackie pants with, but boy is it delicious to wear.

3

My inspiration came from a pair of RTW cashmere trackie pants. Unfortunately I didn’t have any cashmere on hand (nor was it in my budget) but this wool blend did a pretty good job. The sad news is that my fabric is going to pill like crazy after a few wears. Agh… once again I am cursing my foolishness in purchasing a synthetic blend. It’s such a waste when they look rough so quickly. It won’t matter too much with these pants though. The comfort factor will be present no matter how they look, and that’s pretty much all that matters to me in Winter!

5

 

Wrap skirt // stashbust

I had a little bit of wool fabric and lining leftover after the making of Miss Seven’s tailored coat. It was precisely the right amount for ladies skirt. Fancy that.

My original plan was to make a simple, straight skirt using my own skirt sloper. However, when I laid out the wool, it was a lot wider than I remembered and it suddenly seemed a shame to limit myself to a pencil skirt when there was clearly more fabric I could work with.

7

2

Starting with a basic pencil shape, I left the back skirt piece unchanged. I then traced the front skirt piece in full, mirroring the pieces as if to avoid cutting on the fold. In the diagram below, the grey shaded pattern is my altered front piece. I extended the waist along the existing pattern line and shortened the hem width a little. I then simply connected these points with a diagonal line.

It was very important to identify and mark the CF point. This was a perfectly fitted skirt pattern and those CF points needed to match up when I wrapped the skirt around.

wrap skirt

I cut my lining pieces to the same pattern as the outside fabric, minus about 1.5 inches in hem length. Although, to be honest, I always reduce my seam allowance a smidgen when I sew the lining to make sure it ends up a tiny fraction looser than the outside fabric (you don’t want to end up with any pulls or tension visible on the outside).

I sewed the hems of the lining and fabric together first and then turned the skirt out and basted all the other sides together. I bound the CF edges with the opposite side of the wool fabric, although the contrast is totally unnoticeable. I then attached the contrast (once again unnoticeable) waistband and fastenings.

3

1

The skirt I made is a true wrap skirt. It is fastened inside with a ribbon bow and secured with a hook and bar on the outside. I added a leather fastener over the hook and bar for aesthetics. The same pattern pieces could easily be used to create a mock wrap skirt. There would need to be an invisible zipper placed at the side or back. I’d also crop the top portion of the (underlayer) front piece so there is little overlap with the top layer and therefore, reduced bulk at the waistband. This would need to be stitched in place which would limit the freedom of movement that you get with a true wrap skirt, but the benefit would be a sleeker, less bulky front. It’s something I might try next time.

10

Grey knit dress twice over // And a quick how-to

Inspiration usually hits me like a brick. One minute I want for nothing and the next all I can think about is a long sleeve, grey, knit dress.

 

8

 

7

6

My first thought was to make it from scratch. I already had a personal pattern for a sleeveless, fitted knit dress. I just drafted sleeves and extended the sleeve arms and the (ever so slightly tapered) bottom hem to the length I wanted.

You could easily modify any closely fitted T-shirt pattern to make a dress like this. I was going to look up some patterns for you, but Creative Chick has already done the research and I see no point in re-inventing the wheel. Check out her very comprehensive summary list of top patterns, with a quick description of each. For a dress like this, you will need a close fitting T and very stretchy jersey. A wide variety of necklines would suit it.

Once you have a T-shirt pattern that fits perfectly, simply extend the arms in a tapered fashion to the length you want. I’m fond of ultra long arms right now so I extended mine beyond the wrist. Use your fitted T-shirt as a guide when extending your pattern pieces. The diagram shows my extended dress outline in red and my measurement guide in green and black. My fabric had a lot of stretch, so I didn’t need to add any darts for shape. I simply narrowed the waist to avoid too many lower back wrinkles. Stable knits will need bust darts and back darts for a fitted look.

knit dress

I used a lofty, stretchy, wool/acrylic blend, sweater knit for my first version. I’m sceptical of how long the fabric will last, but right now, I’m totally in love with it. In fact, I liked the dress so much that I immediately made a second.

12

My second version is a little more interesting. It’s a truly awesome pure wool ponte knit from Tessuti Fabrics. I’m labelling it truly awesome because it is warm, thick, has great recovery in a stable, ponte-style stretch, has been machine washed more times than I can remember, and just between you and me, I often throw it in the dryer in winter so I can wear it more frequently. It’s possible that the fabric may have faded a bit, but not that I can tell (it’s grey after all), but there is no pilling, no thinning, no stretching, no shrinking, and no other major signs of wear. It cost me a pretty penny but it has been worth every cent.

There’s also a story behind this fabric. In a fit of panic at the idea of landing in Kansas during the infamous polar vortex of two years ago, I purchased several metres of it before I left Australia. I used it to make myself two winter dresses. One was a drop waist Malvarosa and although the loose fitted style had me on the fence, I ended up wearing that (pyjama) dress almost daily for two consecutive winters. I also made myself a fit and flare dress (modified significantly from V8805) and a few other winter items for my girls. The contrast skirt on this second dress didn’t fare as well as the grey ponte knit so I cut it off last year and turned the dress into a simple long sleeve top. I don’t have photos of the top because it was just a wardrobe staple and not blog worthy at all.

When I made the top last year, I removed the (nursing friendly zipper) from the original dress and simply joined the front seam. I also finished the neckline and sleeves with black cotton ribbing. The top was functional, but probably not the most glamorous item in my wardrobe. I didn’t particularly like the neckline. It was just a bit wide for my taste. So for this knit dress, I wanted to see what I could do to fix it. Simply unpicking the original (serged) neckline would have been arduous and wouldn’t have fixed the size and width problem. My solution was to draft a (slightly) stand up collar, that I then attached directly to the existing binding using a small seam allowance. The effect is a contrast line of ribbing between the  collar and dress which I absolutely love.

16

 

This second knit dress was made completely on the fly. The sleeves are possibly a smidgen too long (I got carried away with my length obsession) and there was a lot of (bulky) seaming involved in achieving the length I wanted. Because I was dealing with a more stable knit fabric, I kept the original bust darts and added two fish eye darts to the back for shaping.

14

I love how my two versions turned out. Here are a few more RTW examples for your inspiration.

PicMonkey Collage

Love Culture            //            Proenza Schoeler             //           Banjo & Matilda

 

 

Sentimental sewing // Vintage leather bag repair

My Father-in-law passed away recently. It was a little unexpected and obviously very sad. We will all miss him a great deal. Living so far away meant that it wasn’t possible for our whole family to make such a huge trip on a moment’s notice. However, my husband was able to return to New Zealand and he was fortunate enough to make it home in time (21 hours of travelling later) to be there with his Dad and to spend time with his Mother and siblings.

My husband is very sentimental, so I suggested that he look through his Dad’s wardrobe and ask his Mum if he could bring home a suit or jacket that I could alter to fit him. I was expecting one nice item (his Dad wore a lot of quality RTW and designer brands). He came home with an extra suitcase brimming with shorts, pants, jackets, shirts, an old leather bag, and a particularly fabulous collection of belts (I’ll post some pictures of those belts on Instagram as soon as a day passes when they aren’t being worn).

The clothes fit near enough that I haven’t needed to do any immediate alterations, although everything is a tiny bit bigger than what my husband would normally wear. With plain T’s, casual shorts, and business shirts, this hasn’t really mattered. He’s been wearing at least one of those items every day and I know it makes him feel closer to his father, especially when I know he still feels so much sadness.

I will definitely need to take a closer look at the suit pants and jackets in the future. They are too nice to make do with a less than perfect fit. The bag, however, required immediate attention. The lining was disintegrating on the touch and leaving everything in it’s path covered with a powdery white residue.

3

My first step was to cut out the lining. I left 1/2″  of lining still attached to the bag. I wasn’t quite sure at that point whether I would want to stitch though the bag leather or re-stitch the lining to the top most portion of the existing lining. In the end, I unpicked it all, and hand-stitched it in exactly the same position as the original lining.

Once the lining had been removed, I was able to copy the pattern pieces. There were four pieces in total; two sides, a bottom, and a pocket bag (it was incredibly simple). I was also able to see what a disgraceful mess of inner construction there was hidden beneath the original lining.

2

1

The fabric I used to line the bag was a mix of cotton shirting and heavy silk twill. Both fabrics were leftover from previous projects (here and here) and I had to do a bit of piecing to come up with the amount of fabric that I needed. I put a silk twill panel in the sides of the bag and used the same silk for the pocket bag. There’s one extra seam in the striped shirting, but my stripe matching game was strong and you can hardly see it.

6

Once I’d finished sewing the lining, I pressed down the top seam allowance and glued the lining to the inner leather (in the same manner as the old lining had been attached). I then hand-stitched the lining to the outer bag. I tried to avoid adding new stitching holes, but it was difficult to see where I was going in the old stitching line. The old seam line was quite stained and creased because of age. In the end, I somehow managed to finish with what resembles a modified prick stitch on the inside and a running stitch on the outside. The outside stitches don’t look out of place, and I really like the vintage feel of the tiny inner stitches.

5

It’s actually really difficult to photograph the lining of a bag. Perhaps I should have turned it inside out but I didn’t think of that at the time.

8

 

Embroidered organza shift with sleeves

I decided to make a birthday dress for myself this year.  The fabric was purchased for me as a birthday present last year when my husband was on a business trip to NY. He chose it himself which impresses me to no end. At a glance, it’s gorgeous. In real life, it’s a fabric I wouldn’t  have checked out myself. I would have taken one look at the label and put it back on the shelf. And I would have missed out on a lot of fun.

6

My friends, this delicious embroidered organza is pure, flammable polyester. I suspected as much, but was hoping for a miracle. A burn test outed this beauty. The fibres melted rather than burned. Further confirmation was delivered by an IG buddy who recognised the fabric and remembered its content.

8

9

10

Silk organza would have made this dress an enduring beauty. Polyester organza means this fabric does not breathe. It is stiff, scratchy, and uncomfortably hot. I can deal with the comfort issues by moving the dress into my Winter wardrobe. I think it would look good with a black slip and black tights. The contrast under the sheer organza would be fun.

Unfortunately, my birthday is in the middle of a sweltering Kansas Summer (we’re talking tropical Top End weather to my Aussie friends out there). I could have forgone the sleeves, but the sleeves are an important feature of the dress for me (these were actually the 3rd sleeves I trialled for this dress).

The fabric also does not press or hold a crease. To work around this fact, I kept the design as simple as possible. It’s a sheath with bust darts, French seams throughout, a hand-stitched bound neck, and sleeves. I toyed with the idea of back darts or a CB seam for shaping but after some online research into sheath dress shapes on designer runways, I decided to keep mine without. I’m wearing a white slip underneath it for modesty.

5

I wasn’t keen on hemming the dress and sleeves because the embroidery makes the organza quite bulky and of course it doesn’t press. My solution was to cut the dress and sleeves on the cross-grain so I could incorporate the beautiful selvedge into the design. After putting the dress together, however, I decided that didn’t like the pretty frayed edges after all. I ended up cutting them off but keeping a portion of the un-embroidered selvedge. I also felt that the original flared sleeves were a bit much for the loud fabric so I cut different, more streamlined sleeves instead.

It was a lot of fun making this dress. I loved problem-solving the fabric issues. I will wear it, but probably not during Summer. It might become my Christmas or New Years dress instead.

1